Identificador: 22
Abierta
Descripción
PARTE # 2LSL-99990000506 - AFILADOR AUTOMATICO - ANCHOS 30-40 MM
NUEVA CON GARANTIA
AFILA SIERRAS DESDE 30 A 40 MM ANCHO EN 1 SOLA PASADA
PARA DIENTES ENTRE 18 A 23 MM
The bandsaw blade grinder shall only be used for bandsaw blades with hardened saw teeth. The pitch shall be 25 mm and the bandsaw blade width shall be 32 mm.
Motor Data, Grindlux 4000
Voltage, V: 12
Speed, rpm: 2800
Peripheral speed, m/s: 22
Power, W: 90
Amperage, A: 7.5
Grinding disc, mm: 150 x 6 x 16
Fuse, A: 12 / 0.25
Weight: 18.1 lbs. (8.24kg)
Video maquina trabajando: Video 1
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12295 - LIJADORA DE BANDA ANCHA - 52” ANCHO - 2 LIJAS - TIMESAVERS
PARTE: 12295 - LIJADORA DE BANDA ANCHA - 52”
ANCHO - 2 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
Standard
Specifications:
1st head,
75 HP, 230/460/60/3 hard rubber contact drum
2nd head,
60 HP, 230/460/60/3 hard rubber contact drum
Weighs 16,000 lbs.
AMXmachinery
MOTORES ELECTRICOS 5 HP - 20 HP
MOTORES ELECTRICOS PARA MAQUINARIAPARTE #CAPACIDADVOLTAJERPMMARCA1ME-10055 HP220V, 3 PH, 60 HZ1,700WEG1ME-100757.5 HP220V, 3 PH, 60 HZ1,700WEG1ME-101010 HP220V, 3 PH, 60 HZ1,700WEG1ME-101515 HP220V, 3 PH, 60 HZ1,700WEG1ME-101620 HP220V, 3 PH, 60 HZ1,700WEG
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 9-3/4” - S & P
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 9-3/4” - S & PUSADO - MUY BUENAS CONDICIONESMARCA: S&PMODELO: TTB-250MOTOR ETIQUETA: 1/8 HP, 127V, 60 HZ, 1625 RPM, 2.0 AMPMOTOR REAL: 1/2 HP, 110V, 1 FASE, 60 HZ, 1750 RPMVOL: 1350 M3/HHECHO EN MEXICO
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump