Identificador: 25
Abierta
Descripción
PARTE: 2LO-TG-6000 – AFILADORA DE CUCHILLAS RECTAS - 26" LARGO
Nueva con garantia
Features:
Heavy-duty straight knife grinder, rapid for grinding processing and saving time.
Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.
Automatic grinding table movement forward and backward, label saver.
Employed with straight linear motion guides bearing to ensure longitudinal feed traverse smoothly and accurately.
The knife can be put through a coarse wheel grinding, then a fine wheel grinding for sharpening the knife edge again to obtain the super sharp edge and extend the cutting life of the knife.
Built in coolant pump for faster grinding.
Heavy sheet metal cabinet stand and cast iron body.
High precision and durability.
SPECIFICATIONS | 2TA-TG-3000 | 2TA-TG-5000 | 2TA-TG-6000 |
Grinding Capacity |
|
|
|
Cutter (Dia. x W) | 9" x 8" | N/A | N/A |
Carbide Saw (Dia. x T) | 20" x 3/8" | N/A | N/A |
Carbide Knife (L x W x T) | 12" x 1½" x ¼" | 25" x 3" x 5/8" | 25" x 3" x 5/8" |
Router Bits (Shank) Max. | ½" | N/A | N/A |
Grinding Wheel Size | 6" x 5/8" | 4" x 2" x 5/8" | 10" x 2/3" x 1" |
Grinding Head Travel | 14" | 26" | 26" |
Grinding Wheel Speed | 5000RPM | 1700 RPM | 1700 RPM |
Fine Grinding Wheel Size | N/A | --- | 4" x 2" x 2" |
Grinding Wheel Motor | 1 HP | ½ HP | 1 HP |
Fine Wheel Motor | N/A | --- | --- |
Table Size | 28' L x 8" W | 26" L | 27" L |
Table Travel | 20" x 7" | (Wheel) | 28" |
Table Travel Motor | --- | ¼ HP | ¼ HP |
Coolant Pump Motor | 1/8 HP | N/A | 1/8 HP |
N.W. (LBS) | 748 LBS | 340 LBS | 660 LBS |
G. W. (LBS) | 924 LBS | 430 LBS | 836 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POLIPASTO - CAPACIDAD - 5 TONS
PARTE: 12488 - POLIPASTO - CAPACIDAD - 5 TONS
USADO BUENAS CONDICIONES
AMXmachinery
LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 53” ANCHO
PARTE: 12688 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 3 LIJAS - 53” ANCHO
CEMCO
Usada - Buenas condiciones
Width
capacity 53”. Drum, Drum, Combination Head (see sander specs)
Head 1:
Rubber covered contact roll, 10” dia, 65 shore adjustable with dial
Head 2:
Rubber covered contact roll, 10” dia, 65 shore adjustable w/dial
Head 3:
Combination head, (2) 5-1/2” finishing drums w/platen
440 V, 60
cy, 3 Phase
Year 2000
Machine
weighs app 6000 lbs
...
AMXmachinery
PARTE: 12670 – SIERRA DIMENSIONADORA CNC - CARGA FRONTAL - HOLZMA
PARTE: 12670 – SIERRA
DIMENSIONADORA CNC - CARGA FRONTAL - HOLZMA
Usada - Muy buenas Condiciones
Modelo: HPP350 38/38
Mfg: 2013
Electricos: 480 Voltage 60 Cycle 3 Phase
Cutting length; 3,800 mm (149")
Cutting width; 3,700 mm (145")
Main blade projection; 95 mm (3.7")
Saw carriage forward speed; 16 - 492 fpm
(programable)
Saw carriage reverse speed; 492 fpm
Scoring saw
3
hp
280 mm (11") max. blade
45
mm (1.8") center bor...
AMXmachinery
MOLINO PULVERIZADOR - PULVEX 300
PARTE: 12307 - MOLINO PULVERIZADOR - PULVEX 300
USADA - BUENAS CONDICIONES
MOTOR ACTUAL 12.5 HP, 220V, 2 FASES
SE PUEDE COTIZAR MOTOR 10 A 15 HP 220/440V, 3 FASES