ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL

PARTE: 2NE-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL

Our U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.

With data storage of 5,000 different frame profiles, the operator can easily recall any frame profile alphabetically, numerically or by using the bar code reading option.

The U-500 is equipped with both a horizontal and vertical clamping mechanism to securely hold the moulding during the V-Nail insertion process.

The U-500 now includes a new operating function with its C.A.P.S (Computerized Air Pressure System) feature. See tab below for complete details.

Unique Performance Features

User friendly touch-screen P.C. operation with data storage for 5,000 frame profiles

Integrates Bar Code Scanner option for production efficiency

Equipped with a vertical, double hydraulic pressure clamp

Features a three knob adjustment fence for compensating moulding cuts

Join either from front or back of machine

Easy table tilt adjustment

Machine handles all types of wood, plastics, and MDF materials

Frame Joining Capabilities

Moulding Width (min to max): ¼” up to 4 ½” (6-105 mm)

Moulding Height (min to max): ¼” up to 3 ¼” (6-80 mm)

Max Distance Between V-Nails (stroke): 5 ¾” (145mm)

Pre-set V-Nail: Multiple

Position Stops V-Nail Sizes: 5, 7,10,12,15 mm (SW-HW-HDF)       

V-Nail Channel Capacity: 220 V-Nails/channel

Computerized Air Pressure System

U-500 Computerized Air Pressure System (C.A.P.S.) is the latest operating feature for frame joining eliminating the need to making manual air pressure adjustments for the Vertical Clamping Mechanism. The software includes the functionality of applying a soft vertical clamping motion reducing moulding damage with soft materials or delicate finishes.

This new system provides the following production features...

Eliminates the need of making manual air pressure adjustments for Vertical Clamping Mechanism

Maximizes production efficiently with pre-set clamping pressures

Eliminates moulding material damage by controlled vertical clamping pressure

"Soft" vertical clamping option reducing the chance of moulding surface damage with very soft materials or surfaces with gesso or other delicate finishes

To utilize this new feature, the operator stores in the air pressure values needed depending on the moulding hardness for each of the frame profiles stored in memory. By setting a pressure setting into the memory database, programs recalled through the key pad or barcode scanning option automatically sets the clamping air pressure needed.

All new equipment purchases for the U-500 and U-600 now include the C.A.P.S feature and a field retrofit kit, P/N 298390450, is available for upgrading current customer machines looking to use this new operating feature.

U-500 Purchase Package

(1) 7MM Nail Head

(1) 10MM Nail Head

(1) 12MM Nail Head

(1) Single Vertical Positive Placement Clamp

(1) Single Metal Pressure Plate

(1) Double Metal Pressure Plate

(2) Blue Rubber Pads (for SW)

(2) Yellow Rubber Pads (for MW)

(2) Black Rubber Pads (for HW)

(1) C.A.P.S Operating Software Feature

(1) Adjustable Fence - 3 knobs

(1) Front Horizontal Clamp

(1) 3 Stage Air Pressure Filter Regulator

(1) 4mm Allen wrench

(1) 5mm Allen wrench

(1) 6mm Allen wrench

(1) 8mm Allen wrench

(1) Touch screen PC Panel

(4) Machine base levelers

(1) Floor Stand

(1) Machine manual

Machine Dimensions & Weight

Length: 680mm (27")

Width:  800 (31 1/2")

Height: 1310 (51 1/2")

Weight: 140kg (309lbs.)

Power Requirements

115/220 Volt 50/60 Hz.

Compressed Air 4NI at 5 Bar

Options

Extension Wings Kit for U‐500

Barcode Scanner ‐(Cables not included ‐See 04‐073 or 04‐074 under U‐600 section)