Identificador: 1826
Abierta
.jpg)
.jpg)
Descripción
PARTE: 2LO-WG-1620 - ASTILLADORA - 16 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste.
- Movable screen for changing the size of chips and easy to clean-up.
- Energy efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-1620 |
|
Entrance Capacity (L x W) |
16" x 12" |
|
Rotary Cutter |
6 sets |
|
Stationary Cutter |
4 sets |
|
Busting Capacity at 1/2" Chips |
900 ~ 1500 LBS/ Hour |
|
Finish Chip Size (Custom Size with Order) |
3/4" |
|
Main Motor |
20 HP |
|
Machine Sizes (L x W x H) |
64" x 24" x 68" |
|
N.W. |
2700 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
PARTE: 2GM-PS-4816GT - CORTADORA DE METAL ESTILO GANG 48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut l...
AMXmachinery1
TALADRO MULTIPLE - SISTEMA 29
PARTE: 2JG-MAG-SYSTEM29 - TALADRO MULTIPLE - SISTEMA 29Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(3) patented quick release material clamps with auto-setting to firmly hold ...
-500x500.png)
AMXmachinery1
PRENSA HIDRAULICA UNIVERSAL
PARTE: 4ST-STC - PRENSA HIDRAULICA UNIVERSALUNIVERSAL PNEUMATIC PRESSCLASSICS FOR GLUINGIs a pneumatic press for gluing blockboard, frames, cabinet doors, drawers and doors.The possibility of using two assembly stations, with two-hand control, and up to two working sidesmake it the universal solution for small and medium-sized production facilities.The working unit consists of practical and functional adjustable pneumatic cylinders.Cast iron squares for precise reference of the working area.Tech...
AMXmachinery1
COLECTOR DE POLVOS - 7.5 HP - CICLON
PARTE: 2EX- DC-275 - COLECTOR DE POLVOS - 7.5 HP - CICLONComes in single and three phase models with 2 1-micron filter bags. It features a 117 square foot filter area with 24 cubic feet of storage capacity measuring 140 inches tall by 120 inches wide by 50 inches deep. The single-phase dust collector is powered by a 7.5 horsepower Baldor motor has 38 amps at 220 volts while the three-phase dust collector is powered by a 7.5 horsepower TEFC motor has 20 amps at 220 volts. Drums not included. M...