Identificador: 1827
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2LO-WG-2502H - ASTILLADORA - HORIZONTAL - 24 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste with maximum durability.
- Movable screen for changing the size of chips and easy to clean-up.
- Energy efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-1502H |
WG-2502H |
WG-1504HC |
WG-2404HC |
|
Entrance Capacity (L x W) |
15-3/8" x 2-3/8" |
25" X 2-3/8" |
15-3/8" x 4" |
24" X 4" |
|
Rotary Cutter (Sets) |
18 |
30 |
18 |
30 |
|
Conveyor In-feed Length |
-- |
-- |
98” |
98” |
|
Stationary Cutter (Sets) |
4 |
4 |
4 |
4 |
|
Cutter Speed (RPM) |
575 |
540 |
680 |
680 |
|
Standard Finish Size or Option |
1/2" |
1/2" |
1/2" |
1/2" |
|
Cutter Head Motor |
20 HP |
30 HP |
20 HP |
30 HP |
|
Feed Motor |
-- |
-- |
1 HP x 2 |
1 HP x 2 |
|
Dust Hood |
8” x 1 |
8” x 1 |
8” x 1 |
8” x 1 |
|
Machine Size (L x W x H) |
126" x 53” x 36" |
126" x 53” x 47" |
155" x 51" x 37" |
155" x 51" x 46" |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...
-500x500.png)
AMXmachinery1
CENTRO DE CORTE 5 EJES
PARTE: 4ST-MV 520 - CENTRO DE CORTE 5 EJESProductivity, precision, automation.Is designed for manufacturers of timber-framed houses and TRUSS trusseswho require speed, repeatability and digital integration.5-axis technology for complex cutsThe cutting unit rotates 360° and tilts ±90°, easily performing:- Straight cuts- Angled cuts- High-precision compound cutsPerfect for beams and structural components with variable geometries.Patented handling for maximum speedThe independent dual-belt clamp...
-500x500.png)
AMXmachinery1
RECOGEDOR DE PISO - 21"
PARTE: 2EX-WI-W1003 - RECOGEDOR DE PISO - 21"Use it in conjunction with our 4″ blast gate to clean up floor messes. Sweep dust in, and it’s gone! Close the blast gate when the floor sweep is not in use. Attaches easily to the floor with double-sided tape.Specifications24″W x 3-1/2″H x 7″D overall dimensions4″ outside diameter3/4″ wide flangeABS plastic
-500x500.png)
AMXmachinery1
TALADRO LINEAL - 13 HUSILLOS
PARTE: 2RI-R113 - TALADRO LINEAL - 13 HUSILLOSIs the entry level model in the line drills RITTER has to offer. Is both affordable and built to last. The R113 is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fence is adjustabl...