Identificador: 15
Abierta
ASTILLADORA PORTATIL - CAPACIDAD 10" DIAMETRO - MOTOR DIESEL 85 HP
AMXmachinery
Descripción
PARTE: 2WA-CR100 – ASTILLADORA PORTATIL - CAPACIDAD 10" DIAMETRO - MOTOR DIESEL 85 HP
Video de la maquina funcionando: Video 1
10" x 17" Opening
Hand Clutch
Dual Active Rollers
Intellifeed
Kubota 3620cc Turbo Diesel Engine
Rotor Disc
Angled Rotor
Ledger Adjustment
Easy Start Tension Relief
Safety / Control Bar
360° Swivel Exit Chute
Easy Access Air Filter
Banded V-Belts
Highway Tires
Electric Brakes
Torflex Suspension Axles
Signal Lights
Storage Box
Control Panel
Live Hydraulics
Enclosed Fuel Caps
DRIVE SYSTEM: | Rotor: Quad Belt, Manual Clutch - Feed Rollers: Hydraulic | ENGINE: | Kubota V3600-T-E3 3620 cc (85HP) Turbo Diesel |
CHIPPER CAPACITY: | 10" Diameter (Max. 17" Slab) | CHIPPER HOUSING OPENING: | 10" x 17" |
ROTOR SIZE: | 36" Diameter x 1.25" Thick | NUMBER OF ROTOR KNIVES: | 4 Segmented Knives |
KNIFE TYPE: | Hardened Tool Steel (Rockwell - HRC: 56-58) | ROTOR WEIGHT: | 425 lbs |
DIMENSIONS LXWXH: | 196" x 72" x 100" (Open) | HOPPER OPENING: | 30" x 42" |
DISCHARGE HOOD HEIGHT: | 100" | RATED RPM: | 1400 RPM (Rotor) @ 2600 RPM (Engine) |
WEIGHT: | 5000 lbs Approx. | TIRE SIZE: | ST235-80R16 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12635 - ESPIGADORA – MESA DOBLE – BACCI
PARTE: 12635 - ESPIGADORA
– MESA DOBLE – BACCI
USADA – MUY
BUENAS CONDICIONES
Spindle Speed: 5,700 RPM
Maximum Tenon Lenght:
110mm
Maximum Tenon Depth: 90mm
Maximum Tenon Thickness:
40mm
Cutterhead Motor: 4 HP
Motor for Table Movement:
1 HP
Motor for Cutterhead
Cycle: 1.5 HP
Two Pneumatic Hold-Downs
Twin 15" x 12"
Tables
Manual Hand-Cranks for
Set-Up
Push-Button
Controls
380/400v,
3ph
AMXmachinery
COSEDORA DE CHAPA KUPER
PARTE: 12425 - COSEDORA DE CHAPA KUPER
USADA – BUENAS CONDICIONESModelo FW-1200 EAño Fabricación 1995.Espesor máximo de chapa para coser 2mm.Uso de hilo de marca kuper con hotmelt para
hacer el pegado de la chapa.
Velocidad de avance variable dependiendo de
la tersura o rugosidad de la chapa, espesores etc.
AMXmachinery
PERSIANERA PARA HACER SHUTTERS
PARTE: 2LO-CM-200LG - PERSIANERA PARA HACER SHUTTERSFeatures:- A faster round louver groove mortise machine provides variable oscillating speed.- Distance between the slot is controlled by the template.- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.- Automatic pneumatic hold down clamps- Fully automatic mortise produce cycles.- Pneumatic pistons for drilling depth speed control, enable for best results.- Depth of mortising ...