Identificador: 600
Abierta
.jpg)
Descripción
PARTE # SIL-R-CM12.5B-A26 - BANDA PARA CEPILLO 12.5"
BANDA PARA CEPILLO 12.5 PULGADAS SILVERLINE
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PRENSA ENSAMBLADORA FINGER JOINT
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINTFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard equipment for c...
AMXmachinery
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
PARTE:
12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS
CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads withtwo sided solid carbide knives• Digital electronic thicknessadjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed rollerbefore top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication• New ...
AMXmachinery
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
USADO
– BUENAS CONDICIONESFully operationally
over
$9,000 in steady rests and tooling
max.
capacity 4" dia. x 6" length
Sequence
as follows;
roughing
knife
steady
rest
traveling
roughing knife
second
roughing pattern knife
finishing
pattern knife
parting
knife
Also
....if needed
end
boring bit or formed bit
second
end boring bit or formed knife with side sliding movementLocatelli Dime...
AMXmachinery
SYSTEMA PARA CLAVADO BASTIDORES - PIES 4X8
PARTE # 2RT-R375V - SYSTEMA PARA CLAVADO DE BASTIDORES - PIES 4X84′ X 8′ Vertical Assembly EaselSecond Squaring Bar(6) Universal Clamping Cylinder & ManifoldFoot Treadle45 Degree Vertical EaselSquaring Bars on Right and Left Sides2″ Cylinder Position Grid Pattern3″ Bore Clamp Cylinder HousingPerforated Steel TableManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:U300E04 – Additional Clamp CylinderU300E16 – Foot Trea...