Identificador: 1944
Abierta
Descripción
PARTE: 2WE-TH514 - BRIQUETEADORA - ENTRADA 55” X 55” X 37” - REDONDO 50 MM
NUEVA CON GARANTIA
Capacidad: 80-120 lbs/hr
- Hopper Dimensions: 55.1 x 55.1" x 37" (1,400 x 1,400 x 950 mm)
- Hopper Configuration: 4 Sides straight
- Hopper Volume: 2.4 yds³ (1.85 m³)
- Hydraulic Motor: 12 hp (9 kW)
- Hydraulic Oil Volume: 42.3 gal (160 liters)
- Briquette Diameter: 2" (50 mm)
- Weight: App 2,645 lbs (1,200 kg)
* Image may not depict actual equipment offered. *
Power: 460 V / 60 Hz / 3 Phase
** Output: 80-120 lbs/hr**
*** Outputs must be confirmed with a test trial with prospect's material stream.***
INCLUDED with Briquette Press:
- Hydraulic System
- Hopper Mounted on Frame
- Chrome Plated Clamp
- Automatic Briquette Length Adjustment
- Oil Level Switch
- Anti Vibration Feet
- Control Panel Mounted on Hopper
- Allen Bradley PLC w/ Touch Screen HMI
- Overheating Protection for Hydraulic Oil
- Auto On/Off
- Cone On Agitator and Blocked Corners in Hopper
- Hydraulic Oil Cooling
- Dust Connection at Pressing Unit
ADDITIONAL Options:
- Auger Cover Plate
- Bridge Breakers
- Protective Cover for Touch Screen Panel
- Discharge Pipe for Conveying 50mm Briquettes (3 Sections - 1x 45°, 1x 90°, 1x Straight)
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 2TA-SFJ-4500A - PRENSA ENSAMBLADORA FINGER JOINT - 181” LARGO
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINT - 181” LARGOFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard ...
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO
AMXmachinery
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
AMXmachinery
BRIQUETEADORA - ENTRADA 1.044 X 1.044 METROS - REDONDO 50 MM
PARTE: 2WE-C-150 - BRIQUETEADORA - ENTRADA 1.044
X 1.044 METROS - REDONDO 50 MMNUEVA CON GARANTIA
Capacidad: 30 - 50 kg/hrBriquetacion de polvo de celulosa, polvo y viruta de madera etc.Solicitud actual
Material
Polvo de cellulosa
Tamaño material
Menos de 15mm y pourable
Características material
Libre de objetos extraños , seco con debajo de 16%
de humedad
Alimentación del material
...