Identificador: 1481
Abierta
Descripción
PARTE: 12277 – BRIQUETEADORA PARA MADERA– MOTOR 10 HP – WEIMA
USADA – BUENAS CONDICIONES
Hydraulicaly Controled Press Clamp
Storage Bin Complete with Bin Discharge
Motor Size 10 HP
Performance (depends on material) 60- 80Kg
Briquette Dia. 50mm
Hopper Opening: 55" x 55"
The most economical method for disposing of wood chips, saw dust, and sanding dust
Electrical Cabinet w/ Push-Button Controls
Year: 2005
Our shop tested this and it makes briquettes as
designed
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2LO-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
DOUBLE TABLE SLOT MORTISER - BALESTRINI
PART:
12534-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI
USED
- CHECKED AND CLEANED440V, 3 PHASE
AMXmachinery
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISON
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISONUsada – Buenas condicionesModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
AMXmachinery
RESACADORA PARA TARIMAS – 4 CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL - MOTOR GASOLINA
PARTE: 1AM-1150-G – RESACADORA PARA TARIMAS – 4
CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL - MOTOR GASOLINANueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicasMotor Gasolina 13 HP
Resaque máximo 9” largo x 2-1/2”
alto x 1-5/8” profundidad400 a 800 cortes/hr aprox.Largo de palos mínimo 30”, no
máximoCabezal con 4 cuchillas rectas de HSS acero de alta velocidadCabezal y Cuchillas de
Importación – La más Alta Calidad
...