Identificador: 1647
Abierta
Descripción
PART: 3CH-83A-160-E - BRIQUETTER - METAL CHIPS - HYDRAULIC
NEW - WITH WARRANTY
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Specifications:
|
Model |
unit |
3CH-83A-160 |
3CH-Y83-160 |
3CH-Y83-230 |
3CH-Y83-300 |
3CH-Y83A-300 |
3CH-Y83-800 |
3CH-Y83-1000 |
|
|
Nominal Force |
KN |
1600 |
1600 |
2300 |
3000 |
3000 |
8000 |
10000 |
|
|
Briquetting Size |
Mm |
Φ90× （60-85） |
Φ90× （60-110） |
Φ110× （70-120） |
Φ120× （70-120） |
Φ120× （70-120） |
Φ180× （165-18） |
Φ220× （200-25） |
|
|
Briquetting Density |
Kg/m3 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
|
|
Working Pressure |
Mpa |
23 |
16 |
23 |
21 |
26.5 |
25 |
25 |
|
|
Production Rate |
t/h |
0.6-0.9 |
0.6-0.9 |
1.0-1.5 |
1.2-1.8 |
1.2-1.8 |
6-7.5 |
8.5-12 |
|
|
Total Power |
Kw |
24.2 |
24.2 |
39.2 |
47.2 |
49 |
185 |
225 |
|
|
Machine Weight |
Kg |
4500 |
6000 |
7500 |
8800 |
7500 |
50000 |
60000 |
|
|
Machine Total Size |
Mm |
4900×1470 ×1522 |
4100×1086 ×2006 |
4100×1086 ×2006 |
5000×1600 ×2600 |
4000×1400 ×3700 |
8000×6500 ×2500 |
9000×7500 ×2500 |
|
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Fully hydraulic control equipment, the electric equipment main control part adopts PLC control, the whole working process can realize the automatic operation, reduce the labor intensity and labor.
The system is provided with a manual work procedures, easy to realize the move forward and backward, the mold open and close action adjustment.
The device is provided with one time and two times feeding program,easy to press different size of metal chips
According to customer requirements can increase the automatic feeding, discharging device
Hydraulic system adopts two-ways cartridge valve, with the good sealing performance, good open and close characteristics, pollution resistant etc advantages.
Special unloading loop and the liquid electrical switch protection circuit is arranged in the hydraulic system, to make the machine run smoothly, but also improve the service life of hydraulic components.
The electric control adopts the manual, automatic and two times feeding technology, can conveniently adjust the operation mode and the feeding length, in order to get the material pressing block suppression of different materials and sizes.
The machine adopts the micro movement hopper on pressing device, solved the not easy to feed and discharge problem, also reduce the abrasion of the guard of discharging.
The hydraulic cylinder adopts the main pressure cylinder and fast forward cylinder connected to form the composite cylinder, improve the operating speed, reducing the energy consumption of the motor, but also improve the production efficiency.
The machine adopts PLC control
The machine pressed metal block has large diameter, high density, resist broken, good surface finish, not easy oxidation etc. advantages.
This machine adopts a fully enclosed structure form, can recycling cutting fluid in the metal chips and prevent oil leaking pollution.
Compact different kinds of chips like cast iron, aluminum, copper, magnesium, titanium, molybdenum etc. metal crap chips into high density blocks without any additive, greatly reduce the casting cost.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REFILADOR
PARTE # 12C-R12 - REFILADORACapacidad de refilado de 3 a 5 mmMotor de refilador de 1 hp 220 voltsAjuste de corte de refilador recto y curvoCorte 1 cara
AMXmachinery
CANTEADORA 6" - MOTOR 1.5 HP
PARTE:
SIL-DC-WJ6P - CANTEADORA 6" - MOTOR 1.5 HP
Motor: 1.5 H.P., 110/220V., 60Hz, 1 ó 2 Fases
Altura De La Mesa: 32”
Tipo De Empaque: 1 caja
Peso De La Máquina: 93 Kg.
Máx. Profundidad De Corte: 6” x 1/8”, 3” x 1/4”
Capacidad Máx. De Traslape: ½”
Inclinación De La Guía: 45°, 90° y 135°
Cantidad De Cuchillas: 3 pzas.
Ancho Máximo De Desbaste: 6"
Dimensiones De La Mesa De Entrada: 22” x 7-1/2”
AMXmachinery
PARTE: 2CA-TRS-0016 - SIERRA RAJADOR - 1 HOJA – UNION PEGADO – MOTOR 15 HP – SIERRA 16”
PARTE: 2CA-TRS-0016 - SIERRA RAJADOR - 1 HOJA – UNION PEGADO – MOTOR 15 HP – SIERRA 16”Nueva con garantíaTheir precision machining and attention to operator safety and the production needs make these machines some of the most cost effective machines available in the world today.Hard chrome-plated table for maximum wear resistance.Precision fence ensures absolute accuracy between blade & fence, equipped with measuring ruler gauge.Double anti-kickback fingers mounted at the infeed end pro...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...