Identificador: 126
Abierta
Descripción
2EX-XP124T – CEPILLO 24” ANCHO – MOTOR 15 HP – TITAN – CABEZAL HELICOIDAL
2EX-XP124T – CEPILLO 26” ANCHO – MOTOR 20 HP – TITAN – CABEZAL HELICOIDAL
Nuevo con garantía
Cabezal Helicoidal VECTOR
Features:
VECTOR or straight knife cutter heads
11-3/4” thickness capacity
High Horsepowers: 20 HP & 15 HP
6000 RPM cutterhead
Powered top and bottom bed rollers
Motorized table elevation
Digital thickness controller
Solid cast-iron construction
Triple v-belts
Sectional chipbreakers
Externally adjustable front and rear bed rollers
Sound deadening enclosure
Available 208-230V or 460V
Powered top and bottom feed rollers
| 2EX-XP124T | 2EX-XP-126T |
Width | 24" | 26" |
Main HP | 15 HP | 20 HP |
Feed HP | 1 HP | 1 HP |
Elevation HP | 0.5 HP | 0.5 HP |
Max Thickness | 11.75" | 11.75" |
Min Thickness | 0.375" | 0.375" |
Max Cut | 0.375" | 0.375" |
Min Lenght | 10.5" | 10.5" |
Cutterhead RPM | 6000 | 6000 |
Feed Speed | 20-75 ft/min | 20-75 ft/min |
CFM Requirements | 1100 | 1100 |
Thickness Adjustment | PLC Controller | PLC Controller |
Bed Roller Adjustment | External | External |
Powered Bed Rollers | Top and Bottom | Top and Bottom |
Amps (230V / 460V) | 40A / 20A | 52A / 26A |
Weight | 2500 lbs | 2675 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA CONTINUA 1 LADO
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....
AMXmachinery
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFM
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFMNUEVO CON GARANTIABlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"
AMXmachinery
MESA CLAVADORA BASTIDORES - 4 X 8 PIES
PARTE: 2RT-R375V - MESA CLAVADORA BASTIDORES - 4 X 8 PIES4′ X 8′ Vertical Assembly EaselSecond Squaring Bar(6) Universal Clamping Cylinder & ManifoldFoot Treadle45 Degree Vertical EaselSquaring Bars on Right and Left Sides2″ Cylinder Position Grid Pattern3″ Bore Clamp Cylinder HousingPerforated Steel TableManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:U300E04 – Additional Clamp CylinderU300E16 – Foot TreadleU4501...
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 8”
PARTE:
2FA-RE6X8 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 8”
NUEVA CON GARANTIA
The compact design and
variable speeds allow it to fit into any operation.
The 6 x 8 Master is resaw is
accurate and easy to adjust. Multiple head configurations are available up to 6
heads.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
Width: 90"
Height: 48"
Feed Belt...