Identificador: 580
Abierta
Descripción
COMPRESORES DE TORNILLO - COMPACTOS
Compresor Secador Tanque de Aire de 500 litros
MODELO | Motor | Air Delivery / Discharge Pressure | ||||
HP | KW | 0.7Mpa | 0.8Mpa | 1.0Mpa | 1.2Mpa | |
32IG-HD-5C | 5 | 4 | 0.65 m3/min | 0.55 m3/min | 0.4 m3/min | 0.35 m3/min |
32IG-HD-7.5C | 7.5 | 5.5 | 0.85 m3/min | 0.75 m3/min | 0.56 m3/min | 0.48 m3/min |
32IG-HD-10C | 10 | 7.5 | 1.3 m3/min | 1.2 m3/min | 1.0 m3/min | 0.8 m3/min |
32IG-HD-15C | 15 | 11 | 1.8 m3/min | 1.6 m3/min | 1.3 m3/min | 1.2 m3/min |
32IG-HD-20C | 20 | 15 | 2.6 m3/min | 2.4 m3/min | 2.2 m3/min | 1.7 m3/min |
32IG-HD-30C | 30 | 22 | 3.8 M3/min | 3.6 m3/min | 3.0 m3/min | 2.6 m3/min |
Voltajes opcionales 220V/380V/460V, 50HZ/60HZ, 3 fases
Nuevo con garantía de 12 meses en partes mecánicas
Pre y Pos filtros para línea de aire incluidos
Presión de trabajo: 10 BARS
Bauer Rotorcomp air-end hecho en Alemania
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO
AMXmachinery
MESA DE TIJERA
PARTE: 12046 – MESA DE TIJERA – MESA 32” X 60” – CAPACIDAD 4000 LBUsada en buenas condicionesMotor 3/4 HP, 220/440V, 3 PHAltura máxima 44"
AMXmachinery
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...