Identificador: 720
Abierta
Descripción
PARTE # 10161 – CONTORNEADORA – BACCI PC-STP
En buenas condiciones de operación
Perfiladora y contorneadora
2 cabezales con motores 5.5 HP
Hidráulica y neumática
Largo útil de trabajo 1200 mm
Avance Hidráulico
4 pistones neumáticos
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
PARTE:
12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
USADA – EN BUENAS CONDICIONES
3 lijas superiores y 3 lijas inferiores
Constant passline (38”
height).
This unit is ideal for sanding
heavy panels
Bottom Head first:
1st Head 60 HP 80/70 durometer
Contact Drum,
2nd head 50 HP 80/70 durometer
contact drum,
3rd head 40 HP Platen
96” long Conveyor between
machines driven by the top head machine
Top Head
1st Hea...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...
AMXmachinery
RECUBRIDORA DE MOLDURAS DUSPOH
PARTE # 11545 - RECUBRIDORA DE MOLDURAS - DUSPOHEn buenas condiciones de operacionCaracteristicas:15-3/4" Max. foil width, 3/4" to 23-1/2" max. panel material width with a min. length of 39", material thickness 1/4" to 3-1/2" max.Machine length 7,000 mm (22'9" for 16' material wrapping).
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)