Identificador: 748
Abierta
Descripción
PARTE # 11604 – DEBARKER - NICHOLSON 27" A5A RING
EN BUENAS CONDICIONES DE OPERACION
LEFT HAND
AIR SEAL
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - COSTA
PARTE:
12137 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - COSTA
USADA – BUENAS CONDICIONES
First Machine 4 Heads Bottom
1.Steel Contact Roller 42 KW
2.Rubber Contact Roller 37 KW
3.Rubber Contact Roller 27 KW
4.Rubber Contact Roller 18 KW
Panel Brush Cleaner
Second Machine 4 Heads Top
1.Steel Contact Roller 42 KW
2.Rubber Contact Roller 37 KW
3.Rubber Contact Roller 27 KW
4.Rubber Contact Roller 18 KW
5. Panel Brush C...
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
-500x500.jpg)
AMXmachinery
TALADRO MULTIPLE 23
PARTE # 2RT-R823 - TALADRO MULTIPLE - 23 TALADROSNUEVO CON GARANTIA23-Horizontal Gear Driven Spindles32mm Spindle Centers10 Mm Bored Collets(12) Right Hand, (11) Left Hand3,450 Spindle Rpm3 H.P. Spindle Drive Motor, TEFC0-2″ Adjustable Boring Depth20″ X 42″ Precision Ground TableBack Fence Lip(2) End Boring Fences(1) 5-Ton Carriage Adjusting Jack(4) 2.00″ Bore Clamping CylinderWired 3-Phase 480 Volt, 60 Hz.Foot Pedal Actuated Boring CycleNo Tooling IncludedDesigned And Manufactured In Th...