Identificador: 151
Abierta
Descripción
PARTE # 2SE-DR5-27 - DESCORTEZADORA - 27" CAPACIDAD
Maximum Log Diameter Barked 25”
Minimum Log Length 9’
Number of Debarking Tools 5
Width of Debarking Tools 4”
Maximum Ring Speed 133 rpm
Minimum Horsepower to Operate Ring 60
Maximum Log Feed Speed 221 fpm
Log Feed with 15% Tool Overlap 188 fpm
Hydraulic Pumping Unit 10 hp
Air Pressure Required 90 -100 psi
Machine Weight 35,000 pounds
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"
PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”,
6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8"
USED - VERY GOOD CONDITIONS
North American
Gladu hydro-lock
6 wing
20 degrees
Interior diameter (bore): 1-13/16”
External diameter: 6” (150 mm)
Lenght 2-1/4” (57 mm)
Lenght 3” (75 mm)
Lenght 4” (102 mm)
Lenght 5” (130 mm)
Lenght 6” (152 mm)
AMXmachinery
PARCHADORA RAINMAN
PARTE: 11758 - PARCHADORA RAINMAN
7 - PARCHADORA. MAQUINA
PARCHADORA RAINMAN CON DIMENSIONES DE PROCESO DE 0.6 MM A 2.5 MM DE GROSOR,
EQUIPADA CON MOTOR DE 5 HP Y MESA AJUSTABLE A DIFERENTES MEDIDAS DE DIAMETRO DE
CHAPA PARA PARCHAR.
AMXmachinery
ENCHAPADORA
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,- Total enclosure covers with dust hood connector.- Heavy and rigid construction to ensure necessary accuracy and stability.- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.- The top pr...