Identificador: 2867
Abierta
Descripción
PART: AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used - Good condition
Two (2) saws fixed at 45° angle (saw heads are adjustable up to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle connected to 220V
3,900 blade RPM
Back fence
2 New On/Off Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting capacity with 10" blades: 2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter saw blades can be installed
Table height 35-1/4"
1 Pneumatic pedal and 2 pistons to hold down the wood pieces in the table at the time of cutting
Each cut takes 4 to 6 seconds
Machine dimensions: 32” length x 48" width x 53” height - Weight: 560 lb.
Shipping dimensions: 48” length x 48" width x 58” height - Weight: 590 lb.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...
AMXmachinery
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12567 - REASERRADORA
HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas condiciones
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
AMXmachinery
PARTE: 12561 - REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
PARTE: 12561
- REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
Usada - Buenas CondicionesReturn (needs new belt)460 V/3phEquipped with 6” wide infeed and outfeed belt conveyor (hydraulically driven).Equipped with (2) pneumatic hydraulicly driven hold down wheels.Max width cutting capacity: 6” approx.Push button controls. Dual Head design.Each head is powered by a dedicated motor.HP unknown(manufacturing plates are missing on both saw motors and hydraulic pump)Overall dimensions: 156...