Identificador: 1708
Abierta
Descripción
PARTE: 2CK-MX340M - ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm; strip material up to 4mm can be hand-fed
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit
TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required
BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
|
|
INCH |
METRIC |
|
Feeding speed |
23 FPM |
7 m/min |
|
Panel Thickness |
0.472” – 1.77” |
12 - 45 mm |
|
Edge thickness |
0.0158”– 0.118” |
0.4 – 3 mm |
|
Minimum panel size |
4 ¾” x 4 ¾” |
120 x 120 mm |
|
Working table size |
33.5” |
850 mm |
|
Dust collection outlet diameter |
2” x 4” |
2 x 100 mm |
|
Total connected power |
5 HP |
3.8 KW |
|
Air |
7.06 CFM / 85 – 100 PSI |
200 litres/min /6 – 7 kg/cm² |
|
Max. machine dimensions (LxWxH) |
115” x 47” x 48” |
2921 x 1194 x 1220 mm |
|
Machine weight |
968 lbs |
440 kgs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE
PARTE: 3HO-MZ73211 - TALADRO MULTIPLEThe machine is used to drill furniture parts on horizontal and vertical planes, and can also be used for 45 and 90 degree drilling for further assembly of frame structures, facades and other products.
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 43" ANCHO
PARTE: 2EX-XS-2P43 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 43" ANCHO43" 30 / 25 HP Performa Series Wide-Belt Sander75″ Belt LengthOver thickness safety deviceInfeed bed rollersDigital thickness controllerIndividual amp metersDisc brakes on sanding headsTelemecaique electricsCamozzi pneumaticsVariable speed drive systemSpecifications:Horsepower: 30/25HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 43" x 75"CFM Requirement: 4200Main Motor: 30 / 25 HPFeed Motor: 3 HPElevation Motor: 0.5 HPContact ...
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 10 HP
PARTE: 2EX- DC-3100 - COLECTOR DE POLVOS MODULAR - 10 HPIs powered by a 10 horsepower motor and comes equipped with 3 1-micron filter bags. It features a 99 square foot filter area with 36 cubic feet of storage capacity measuring 112 inches tall by 110 inches wide by 32 inches deep. This three-phase dust collector has 27 amps at 220 volts. Modular ring design enables increased storage and filter capacity. Magnetic starter included. Please refer to the comparison chart below for specification...
AMXmachinery1
BOLSA DE REPUESTO - PLASTICO
PARTE: 2EX-DC-275CLPL40 - BOLSA DE REPUESTO - PLASTICOPlastic Dust Collection Bags 38" x 50", Box of 40 for 24" ring diameterFits dust collectors with 24" ring diameter