Identificador: 2808
Abierta
.PNG)
.PNG)
Descripción
PARTE: 2SS- EZ 72GP - ENCHAPADORA DE CANTOS - PEGAMENTO CALIENTE
The Glue Pot Edgebander applies glue to your panel, before edgebanding it and trimming it at up to 24 feet per minute. Engineered with a temperature controlled Glue Pot, prevents glue from overheating or splattering. The Edgebander is the ideal solution for smaller woodworking shops currently edgebanding inefficiently or doing it by hand. Two industrial routers and knives provide trimming and minimizes the need to sand or file edges from material. It applies banding on rolls up to 1mm thickness and thicker single strip banding. The price and performance of this machine makes it the perfect choice for the small to medium sized woodworking shop.
Features:
- Digital P.I.D. temperature control to reduce glue overheating and burning with standby temperature mode.
- Micro adjust tape guide makes changing tape widths fast and simple.
- Electromagnetic end cutters means no need for compressed air supply.
- Dust collection outlet reduces trimmings
- Easy to set-up, operate, and maintain.
- Anodized glue pot interior for ease of cleaning.
- Built in safety control to prevent glue spindle motor from being turned on before glue is melted.
- Short 10-12 minute glue heat up time.
- Accutrim edge trim system uses industrial duty trim router motors ensuring a quality finish.
- Automatic conveyor for consistent feed rate.
- Solid edge flush trimming and edge molding capability.
- Machined billet aluminum components.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJA
PARTE: 2SS- WBS4375101 - LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJAOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt trans...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-M412 - CEPILLO 4 CARAS – 5 MOTORES - 13” ANCHO
PARTE: 2CK-M412 - CEPILLO 4 CARAS – 5 MOTORES - 13” ANCHOEconomical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S. With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more. The electronic digital thickness control and mechanical readouts allow for fast and accurate adjustment of the spindles to produce ...