Identificador: 751
Abierta
Descripción
PARTE # 11860 - ENCHAPADORA - CEHISA EP9
220V, 3 Ph, 60 Hz, 23.5 AMP
ALIMENTA AUTOMATICAMENTE LA CINTA
CORTA AL PRINCIPIO Y AL FINAL
PERFILA AMBOS LADOS A LO LARGO
PULE AMBOS LADOS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TALADRO VERTICAL - PARA CABEZAL SENCILLO O MULTIPLE - 2 HP
PARTE: 2CA-BR-62 -
TALADRO VERTICAL - PARA CABEZAL SENCILLO O MULTIPLE - 2 HPMotor eléctrico 2 HP, 220V, 3 fases
Pistón neumático con movimiento arriba y abajoStandard with Drill Chuck Optional with Multiple Drill HeadFeatures:• Pneumatic operation to drill several holes at once producing mass drilling capability.• Precision large travel piston to ensure accurate drilling position.• The machine is ruggedly constructed throughout and convenient operation facilitated by the useof a f...
AMXmachinery
TORNO PARTES IRREGULARES AUTOMATICO
PARTE: 12138 – TORNO PARTES IRREGULARES AUTOMATICO
USADO – BUENAS CONDICIONES
4 pieces worked
contemporaneously
max. diam. of work mm.
280
max. working length mm.
1250
cutters rpm 4.950
cutter motor power Hp 10
( 7,5 Kw )
rotation speed of pieces
rpm ( min.0 / max.100 )
feed speed mm./1 ( min.0
/ max. 500 )
diam. of cutters mm. 210
pneumatic system
pressure 6/10 bar
totally enclosed
total installed power Kw
10
connection voltage Volt.
380 / Hz ...
AMXmachinery
RESACADORA SENCILLA – 60” CAPACIDAD LARGO
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA
– 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HRStandard FeaturesCutter Head is Never ExposedTable Moves w/Dual Air Rams Á Linear BearingsDouble Clamp System Machine SpecsDimensionsLength: 60"Width: 90"Height: 50"Table Height: 37" Power20 HP Electric Motor: 208/230/480/3/60 TEFCCompletely pre-wired motor starter with start/stop
buttons and circuit overload protection SpecificationsArbor & Bearing Size: 2"Approx. 2000 lbsTabl...
-500x500.jpg)
AMXmachinery
LIJADORA DE DISCOS Y CEPILLOS - SLIPCON
PARTE # 11780 - LIJADORA DE DISCOS Y CEPILLOS - SLIPCONEN MUY BUENAS CONDICIONESMODELO: DBB-1350Specifications· Working width: 1350mm· Maximum thickness of work-piece: 100mm· Minimum thickness of work-piece: 1mm· Motor disc-station: 1.5 kW with 50-300rpm· Oscillation: 0.37 kW, 10-40rpm, 100mm· Motor (each sanding roller): 2.2 kW, 14-300rpm (400mm)· Diameter sanding roller: 300/4...