Identificador: 2917
Abierta
.PNG)
Descripción
PARTE: 2PI-HPJ - ESPIGADORA HORIZONTAL - INSERTADORA DE PERNOS
Is a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole.
- Elimination of complicated machine setup
- Quick, accurate assembly
- Gain production times on CNC routers and Point to Points by shifting boring and doweling
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CENTRO DE MAQUINADO - EVOLUTION FLEX CNC
PARTE : 2JG-MAG-EVOLUTIONFLEX - CENTRO DE MAQUINADO - EVOLUTION FLEX CNCAccurately routes, drills, and grooves from underneath with automatic operator return or can be unloaded from the back.This machine is designed for one man operation and practically zero set-up timeIt is capable of routing, boring both vertically and horizontally, and for hinge holes, while also providing a grooving sawIt has an integrated control panel with an industrial PC using Windows Operating System, 17" color moni...
AMXmachinery1
EXTRACTOR DE POLVOS - 7.5HP
PARTE: 2EX-DB-75.3 - EXTRACTOR DE POLVOS - 7.5HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for speci...
-500x500.png)
AMXmachinery1
ESPIGADORA Y MORTAJADORA - 6 EJES
PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJESIs a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volumeproduction requirements.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.Climb cut of both tenon and mortise cuts for a tear out free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eliminates the need for applying inlays.Reduces the maintenance...