Identificador: 1923
Abierta
Descripción
PARTE: AMX-10138 - EXTRACTOR CENTRIFUGO - MOTOR .20 HP, 208-230V, 1 FASE
USADO - BUENAS CONDICIONES
MOTOR .20 HP, 208-230V, 1 FASE, ABIERTO
MEDIDAS: 13” ANCHO X 10-3/4” FONDO X 12” ALTO
ENTRADA REDONDA: 7-1/4” DIAMETRO
SALIDA RECTANGULAR: 9” X 8-3/4”
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM INTERNO - 15” DIAM EXTERNO - ½ HP
PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM
INTERNO - 15” DIAM EXTERNO - ½ HP
USADO - MUY BUENAS CONDICIONES
MOTOR ½ HP, 200/230/460V, 3 FASES,
RPM 1140
AMXmachinery
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTO
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTOUsada - Buenas condicionesHIGH POINTMODELO: HP-11MFG. 2004Motor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor costs2. Pneumat...
AMXmachinery
RACK PARA PRENSA TABLEROS - 12 PIES LARGO
PARTE: 2TY-79F-12 - RACK
PARA PRENSA TABLEROS - 12 PIES LARGO
NUEVA CON GARANTIA
30 prensas con altura de 3-1/2”
y 40” abertura
Ajustador de las prensas manual
Diseñada para 72 paneles por
día
(5) total gluing levels
Includes (30) 3 1/2″ High Jaw 40″ opening clamps
(52″ Clamps Available on Request)
Innovative, Space Saving Feature that allows the
Clamps to be hung Vertically when not in use
Versatility to Edge Glue Hundreds of Woodworking
Component...
AMXmachinery
AFILADORA DE CUCHILLAS RECTAS – INDUSTRIAL - 1000 MM
PARTE: 4MV-PX1000 – AFILADORA DE CUCHILLAS
RECTAS – INDUSTRIAL - 1000 MM
Nueva con garantía
Technical
features:
Mini-PLC
controlling automatic downfeed, spark-out and downfeed right or left and right
Heavy
duty grinding motor 2,2 k W (3 HP) - 2800 RPM;
Tilting
head to grind hollow surfaces;
Carriage
run guides covered with replaceable hardened steel guides;
90°
rotating knife-mounting chuck;
Supplied
with stepped blocks to grind 4 overlapping planer blades s...