HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS

PARTE: 2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS

NUEVO CON GARANTIA

The digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns

• Design programs with up to 8 segments (steps) in Ramp-Hold mode.
• Fire to a single temperature at a single speed in the simplified Single Speed mode.
• Ramp-Hold mode can store 4 programs.
• Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
• Add Hold Time during firing without having to stop the kiln to reprogram.
• Control both heating and cooling in Ramp-Hold.
• Program Review lets you check the program you are about to fire.
• Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
• Temperature display throughout firing and cooling in your choice of °F or °C
• Thermocouple Offset adjusts the thermocouple readout.
• Set the Delay to turn on the kiln later to suit your schedule.
• Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
• 12 Month Warranty
• LED Lights show whether you are in program, review, or firing mode.
• Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

Features of the Fusion-7

• Digital Sentry Xpress with 8 Segment Ramp-Hold, Skip Segment & Program Review
• Heating elements in top of all models
• Element groove that eliminates element pins
• ¼” heavy duty sheathed Type-K thermocouple
• 2 ½” insulating refractory firebrick in walls and bottom; 3” firebrick lid
• Lock-in lid support
• Full-formed galvanized steel base
• Louvered switch box, heavy duty wiring
• Tapered peephole with plug for a wide view

OPCIONALES

FSGF7B Furniture Kit

Recommended furniture kit for the Paragon Fusion-7, GF-7B, and equivalent sized kilns. Included:

1 C-13 Shelf (13” round x 1/2”)

4 – 1/2” long, 1” wide Square Posts

STD18

18" wide x 12 1/4" tall deluxe stand with casters. Conveniently move your kiln out of the way when not in use. Heavy-duty stands remain rock-steady with power pressed steel frame and reinforced legs. 2" smooth rolling steel casters included. Shipped

Lid Safety Switch

The optional lid safety switch turns off power to the heating elements when the lid is raised. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid. IMPORT

 

1 inch x 3 inch Glass Window, Fusion Style

Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage from tack fu

 

Fusion 6 and 7 Bead Door

Adding the optional 2 1/2” x 6 1/2” bead door to your Fusion-6 or -7 is like buying two kilns instead of one. Not only can you fuse and slump glass, but with the bead door you can also anneal glass beads. Comes complete with bead mandrel holder.

 

 

Mercury Relay, Single TF-26, 30 amp

Order your new kiln with the factory installed mercury relay upgrade. The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays.

 

Fusion Fiber Lid, optional on new kilns

The Fusion-series glass kilns can be ordered with an optional ceramic fiber top in place of the firebrick top. Serious glass artists have long requested the fiber top for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainles