Identificador: 141
Abierta
Descripción
PARTE: 2LB-CA-1554 - LIJADORA - CALIBRADORA - 15" ANCHO - 1 LIJA
- Combination head configuration drum and platen produces a finer finishing result.
- Pneumatic controlled OSCILLATING BELT SYSTEM and easy adjustable pressure for sanding different wood materials such as veneer, hard wood and soft wood.
- Conveyor table roller extension, ideal for big panel sanding such as doors, window frames, etc.
- Specially designed for one side open body sanding up to 30 panels with two passer.
- The emergency stop device ensures instant shot shown of machine running.
- This unit is ideal for the fine finishing requirements of general cabinet parts.
- All rollers and pulley have balancing adjustments ensuring maximum stability.
- High quality conveyor belt gives an outstanding gripping performance.
- Spiral shaped and grooved contact roller is ideal for calibration sanding.
- Infeed and outfeed are spring-loaded to ensure positive roller feeding.
- An electric sensor for excellent operation controls the belt oscillation.
- Designed for efficient small panel sanding at jaw body.
- Heavy-duty construction with precision working parts.
- Air cylinder control tension belt.
- Opcional: Extension rail
SPECIFICATIONS | CA-1554 |
Sanding Width | 15" |
Sanding Belt Size | 15" x 54" |
Conveyer Size | 15" x 64" |
Min. Working Length | 12" |
Max. Working Thickness | 6" |
Feeding Speed | 20 FPM |
Sanding Motor | 7½ HP |
Feeding Motor | ½ HP |
Air Requirement | 6 CFM |
N.W. | 840 LBS |
G.W. | 960 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ARMADORA DE TARIMAS - MANUAL
PARTE: 1AM-5000 -
ARMADORA DE TARIMAS - MANUAL - DESDE 30X30 PULG HASTA 50X48 PULG
Nueva con garantíaPara tarimas de 3 y 4 barrotes
Desde 30” x 30”
Hasta 50” largo Barrote x 48” ancho
Medidas de la armadora con colgador clavadora
110 cm fondo x 229 cm ancho x 275 cm alto
43” fondo x 90” ancho x 108” alto
Puede usar cualquier clavadora para tarima
(Bostitch, Silverline, etc.)
Clavadoras no incluidas
AMXmachinery
CABINA SAND BLASTER
PARTE: 1HA-005 - CABINA PARA SAND BLASTER ARENADONueva con garantiaTamano Total: 59 largo x 49 fondo x 48 alto cm Espacio de Trabajo: 56 largo x 46 fondo x 28 alto cm Incluye: Gabinete, pistola aspersora, lampara interna, guantes y manual del usuario;Requiere: Aire comprimido, colector de polvo y energia electrica;El consumo de aire es variable y depende directamente del trabajo a realizar.
AMXmachinery
SIERRA RADIAL AUTOMATICA
PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with
variable speed control
35 1/2 "
working height. Adjustable leveling feet.
NEW: Additional
guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...
AMXmachinery
BOMBA DE VACIO - 7.5 HP
PARTE: 2LO-VC-DR07 – BOMBA DE VACIO – 7.5 HP - DRY ROTARY VANE(VC-DR07) Dry Rotary Vane Type Vacuum PumpSingle stage rotary vane vacuum pump are directly connected the outer covers of aluminum alloy pump with the electrical motor, for efficient and heat dissipation.The pump are advanced in stable functioning and low noise for acquiring High vacuum pressure, high water vapor toleranceDry operation for oil-less and direct drive with no belts or gears to ensure low energy consumption usageCompa...