Identificador: 216
Abierta
Descripción
PARTE # 1N-LIJ-020 - LIJADORA DE BANDA CON MESA MOVIBLE – MOTOR 5 HP, 220V, 3 FASES, MESA 31”X 102”
INDUSTRIAL PARA USO RUDO
LIJADORA DE BANDA CON MESA MOVIBLE
DIMENSIONES MESA: 31" X 102-3/8"
CURSO HORIZONTAL DE LA MESA: 31-1/2"
DIAMETRO DE LAS POLEAS: 12"
ANCHO DE LAS POLEAS: 6-1/2"
LOGITUD DE LA LIJA: 7.20 MTS
VELOCIDAD DE LA LIJA: 1100 MTS/MIN
DISTANCIA ENTRE CENTROS POLEAS: 3,100MM
ROTACION POLEAS: 1150 RPM
MOTOR: 5 HP, 220V, 3 FASES
MOTORES OPCIONALES 110/220V, 1 FASE
MEDIDAS MAQUINA: 300 CM LARGO X 200 CM ANCHO X 160 CM ALTO
PESO: 500 KGS
VIDEO DE LA MAQUINA FUNCIONANDO:
Video1: https://vimeo.com/638851755
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA - 7 CABEZALES - WEINIG UNIMAT 22
PARTE:
12716 - MOLDURADORA - 7 CABEZALES - WEINIG UNIMAT 22
Usada - Buenas
condiciones
Bottom, Right, Left, Right, Top, Bottom,
Universal
Maquina completa - Poco uso
AMXmachinery
CABEZALES PARA TALADROS - DISTANCIA AJUSTABLE
PARTE: 2LO-A-2CWSERIES - CABEZAL PARA TALADROS - DISTANCIA AJUSTABLEMicro Adjustable.Maximum flexibility of drills distance application.Accurate center distance positioning.Heavy-duty construction requires minimum maintenance.Fast setup that helps reduce boring downtime. SpecificationsDimensionsABCDEFA-2CW130.39" (10 mm)0.39" (10 mm)1." (28 mm)2" (55 mm)4" (106.5 mm)2" (57 mm)A-2CW185" (127.5 mm)3" (67 mm)A-2CW195" (127.5 mm)3" (67 mm)A-2CW226" (143 mm)3" (82 mm)A-2CW258" (191 mm)4" (109 mm)...
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
CORE BUILDER
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...