Identificador: 1099
Abierta
Descripción
PARTE: 12052 – LIJADORA QUICKWOOD ELITE PRO1100
Usada en muy buenas condiciones
Machine has been cleaned & checked.
240 Volt 3-Phase
Complete with dust hose & manifold
QUICKWOOD ELITE PRO 1100
* MAX WIDTH OF WORKPIECE...43"
* MAX HEIGHT OF WORKPIECE...3.9"
* MAX LENGTH OF WORKPIECE...INFINITE
* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)
* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN
* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN
* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)
* ACOUSTIC INSULATION...THIS SANDER IS EQUIPPED WITH TURBOFANS FOR HOLDING THE WORKPIECE BY MEANS OF A VACCUM AND ARE FITTED WITH CLOSED CELL FOAM SOUND DEAFENING PANELS ATTACHED TO THE BOTTOM PANELLING, IN ORDER TO REDUCE THE NOISE LEVEL.
YEAR 2006
PHASE 3 PHASE
VOLTAGE 220 VOLT
ESTIMATED DIMENSIONS 98" X 80" X 83"H
ESTIMATED WEIGHT 5,000 LBS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachinery
PARTE: 12628 – TROMPO AUTOMATICO – REDONDO – RYE MACHINERY
PARTE: 12628 – TROMPO AUTOMATICO – REDONDO – RYE MACHINERY
USADO – BUENAS CONDICIONES
AMXmachinery
ENCHAPADORA
PARTE # 2TA-EB-7B - ENCHAPADORA DE CANTOS RECTOS Automatic feed station for: Pre-milling, Gluing, Pneumatic Guillotine, Double End trimming, Top & Bottom Rough Edge Trimming, Corner Rounding & Fine Top & Bottom Fine Edge trimming, Edge Scraping, Grooving, Edge PolishingThe feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.Total enclosure covers with dust hood connector.Heavy and rigid construction to ensure necessary accuracy and stability.To guarant...
AMXmachinery
PARTE: 12425-2 - COSEDORA DE CHAPA KUPER
PARTE: 12425-2 - COSEDORA DE CHAPA KUPER
USADA – BUENAS CONDICIONES
Modelo FW 1150
Año Fabricación 1995.
Espesor máximo de chapa para coser 2mm.
Uso de hilo de marca kuper con hotmelt para hacer el
pegado de la chapa.
Velocidad de avance variable dependiendo de la tersura
o rugosidad de la chapa, espesores, etc.