Identificador: 573
Abierta
Descripción
MOTORES ELECTRICOS PARA MAQUINARIA
PARTE # | CAPACIDAD | VOLTAJE | RPM | MARCA |
1ME-1005 | 5 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-10075 | 7.5 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1010 | 10 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1015 | 15 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1016 | 20 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12558 - CENTRO DE MAQUINADO - 2014 HAAS VF-6SS
PARTE: 12558 - CENTRO DE MAQUINADO
- 2014 HAAS VF-6SS
USADO – MUY BUENAS CONDICIONES
SPECIFICATIONS:
TABLE
LENGTH 64"
TABLE
WIDTH 28"
TABLE
CAPACITY 4,000 lb
X-AXIS
TRAVEL 64"
Y-AXIS
TRAVEL 32"
Z-AXIS
TRAVEL 30"
SPINDLE
SPEED 10,000 RPM
SPINDLE
MOTOR 30 hp
SPINDLE
TAPER CAT 50
TOOL
CAPACITY...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
PARTE:
AMX-10081 - EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
CINCINNATI FAN
MODEL: PB-9
TAG: PO:180203-1
S/N: 1801810-1,
MOTOR 1 HP, 115/208-230V
10.10/5.64 - 5.06 AMPS
1 FASE, 60 HZ
3500 RPM
ENTRADA 4" DIAMETROSALIDA 4" DIAMETRO
MEDIDAS: 15” ANCHO X 21” LARGO X 17” ALTO
6,500.00 MXN
AMXmachinery
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE: 2TA-TG-9330 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIAFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grindin...
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"