Identificador: 2465
Abierta
.PNG)
.PNG)
Descripción
MULTISTEP CNC
Multistep machine with the option of many various processing options in one machine. There are several possibillities of extensions for our X-Line machine, from specialized magazines to integration of other machines
• Magazine: vertical or horizontal
• Formatting – saw with scoring
• Drilling – from 6 sides
• Milling – horizontal (front/back) and vertically (up/down)
• CNC milling
• Doweling
• T-nut insert
• Waste conveyer
• And many other options
- Length:
200 – 2200 mm - Height:
10 – 85 mm - Width:
25 – 400 mm
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CEPILLO 2 CARAS EJE CARDAN 24"
CEPILLO 2 CARAS EJE CARDAN 24" 2CK-GTG10HIIs capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out. The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much...
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 1 HUSILLO
PARTE: 2RI-R130 - BARRENADORA HORIZONTAL - 1 HUSILLODescription:Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:Single spindle head7/16-14 Female Thr...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...