Identificador: 2046
Abierta
Descripción
PARTE: 12428 - UNIDORA DE CHAPA PARA CENTROS DE TRIPLAY
USADA – BUENAS CONDICIONES
Ancho útil de trabajo 1300mm
Largo de las chapas a obtener 2500mm.
Velocidad Variable de trabajo desde 10 hasta 50 ml.
Espesor mínimo de unido e chapa 1mm , máximo 2.3mm.
Unido mediante hilo y hotmelt.
Año de fabricación 2019.
Voltaje 380 60 Hz
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EX-DC-2100 - COLECTOR DE ASERRIN CON CICLON
PARTE: 2EX-DC-203C – COLECTOR DE ASERRIN CON
CICLON – MOTOR 3 HP – 1785 CFMPARTE: 2EX-DC-250 – COLECTOR
DE ASERRIN CON CICLON – MOTOR 5 HP – 2975 CFMPARTE: 2EX-DC-275 – COLECTOR DE ASERRIN CON CICLON – MOTOR 7.5 HP – 4850 CFMPARTE: 2EX-DC-2100 – COLECTOR DE ASERRIN CON CICLON – MOTOR 10 HP – 6400 CFMNuevo con garantía1 micron filter bagsDrums not includedLow noise operationstandard 1 micron filterheavy duty dynamically balanced
impellersheavy gauge steel con...
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
PARTE: 2PG-TNF243 – HORNO PARA CERAMICA, VIDRIO, METALES – 201 LITROS
PARTE:
2PG-TNF243 – HORNO PARA
CERAMICA, VIDRIO, METALES – 201 LITROS240V, 60 Hz, 48 amps, 1 faseCrystalline Glazes, Decals, Low-Fire Ceramics, Porcelain and StonewareDuring busy seasons when orders are backlogged, you will be grateful you own a dependable Paragon kiln such as the TnF-24-3. Studio owners call these kilns “real work horses.”Have withstood years of abuse in school environments. High school ceramics teachers fire these kilns unmercifully, without remorse. Yet the kilns ke...