Identificador: 2173
Abierta
Descripción
PARTE: 12477 - COVING BACKSPLASH - EVANS
USADA - BUENAS CONDICIONES
14 feet long x 5 feet deep
208 Volts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2CK-MX340 – ENCHAPADORA DE CANTOS AUTOMATICA
PARTE: 2CK-MX340 – ENCHAPADORA DE
CANTOS AUTOMATICA
NUEVO CON GARANTIAHigh-quality
edge banding results for cabinet parts and case goods.The
MX340 Automatic Edgebander is a compact edgebander capable of applying up to
3mm thick edge tape on cabinet parts and more. It comes equipped with
high-frequency motors on both the end trim and top & bottom trim. In
addition, it is equipped with PVC radius scraping and buffing units. Its
compact design and affordable price point make it th...
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
AMXmachinery
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOP
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOPUSADO – MUY BUENAS CONDICIONES – COMO NUEVOBALEROS NUEVOS MARCA FAGPPROBADOCONECCION PARA BRIDAMARCA: TECHTOP15 HP230/460V3 FASES33.1/16.9 AMPRPM: 3550MEDIDAS: 23.5” LARGO X 12.25” ANCHO X 15.5” ALTOSE ENVIA EN PEQUENA TARIMA
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...