Identificador: 2762
Abierta
Descripción
PARTE: 12674 - REASERRADORA - 1 SIERRA - BAKER
Usada - Buenas condiciones
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75”
PARTE: 2MA-800CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity
(Not included)30 mm Arbor diameter73.23" x 45.08" Table size27.75" Max crosscut length on 3/4"
thick material (90 deg)0 to 40.5" Rip capacity4.9" Max depth of cut19.68" Max cut length at 45 deg on right
side12.20" Ma...
AMXmachinery
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERS
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERSEn buenas condicionesModelo: 337-6RPRotary polisher has six (6) 1/2HP counter-rotating arbors with fladder-style abrasives.Rotation 12-35 RPM, 2HP variable feed 15-45 FPM on conveyor belt with vacuum bed. (Less vacuum pump unit).36” width capacity. Each arbor/spindle is 12”-long x 2”-diameter, arbor speed 100-1200 RPM, with LED readout on RPM. 0” – 6” motorized part thickness opening.Infeed and outfeed pinch rolls.Wired 460V...