Identificador: 2765
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12677 - LINEA DE CORTE DE ROLLOS DE ACERO - DAHLSTROM
USADA - BUENAS CONDICIONES
Línea de corte de rollos de acero
Se estuvo utilizando para el corte de rollos de acero calibre 28 para la elaboración de puertas laminadas
Funciona perfectamente bien
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2MA-FP-4075 - LIJADORA - CALIBRADORA DE METAL - 40" ANCHO - 1 LIJA
PARTE: 2MA-FP-4075 - LIJADORA - CALIBRADORA DE METAL - 40" ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/2”Abrasive...
AMXmachinery
PARTE: 2AM-U-200 - ARMADORA DE MARCOS - MANUAL
PARTE:
2AM-U-200 - ARMADORA DE MARCOS - MANUALNUEVA CON GARANTIAThe U-200 is an entry-level frame assembly machine for any small retail operation. As a fully manual machine, it requires no compressed air or electrical power to operate. This unit allows the framer or graphic shop owner to bring the joining operation in-house for cost control and quick customer turn-a-around.The U-200 is compact, quite operation and has a small footprint. Our lightest and most portable joiner, it can be easily mo...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINAS
PARTE: 12202 – ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINASUSADA - EN BUENAS CONDICIONESLinea de moldurado tanto longitudinal como de cabezasTongue
and Groove line, makes heads and longitudinal ways to manufacture engineer or
solid wood flooringBrand Catenalli380
voltsMaquina longitudinal:Max
width working boards 300mm , Min wide 80mm.2
motors per each side 7.5 HP each oneMaquina transversal:Max length working boards 2450mm , Min Length 300mm.3
motors of each side , 7.5 HP each o...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...