Identificador: 2327
Abierta
PARTE: 1AM-3010 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO
AMXmachinery
Descripción
PARTE: 1AM-3010 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO
MESAS LATERALES
PARA SIERRAS, CEPILLOS, CANTEADORAS, ETC.
PARA ENTRADA Y SALIDA DE PIEZAS LARGAS Y/O PESADAS EN MAQUINAS
NUEVA CON GARANTIA
120 CM LARGO X 39 CM ANCHO
ALTURA VARIABLE 83 CM – 87 CM
7 RODILLOS CON BALERO
OPCIONAL:
- LARGOS ESPECIALES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
-500x500.jpg)
AMXmachinery
LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHO
PARTE: 3UD-UMD8130 – LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHOCOMPACTA - SUPER HEAVY DUTY MACHINENUEVA CON GARANTIAA. The machine is mainly a variety of plates were thick sanding.B. Mineral cast body with the overall structure, having sufficient rigiditybalance, greatly improving the stability of the machine work.C. Sanding large roll diameter, increasing the service life of the belt, andthe dynamic balance precisely, smooth operation.D. Feeding frequency control, speed range...
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN