Identificador: 2070
Abierta
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP
AMXmachinery
Descripción
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP
USADO - MUY BUENAS CONDICIONES
MOTOR 1 HP, 220/440V, 3 FASES, RPM 1750
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS – NORTHTECH NT400XL
PARTE:
12273 – CEPILLO 2 CARAS – NORTHTECH NT400XL
USADO – MUY BUENAS CONDICIONES – SOLO POCAS HORAS DE USOCabezales Helicoidales218 hours on the machine43 HP total230 volt
Belt drive
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROS
PARTE:
2PA-SC2 - HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROSNUEVO CON GARANTIAIdeal for Teachers“I have traveled with my SC-2 for 11 years. I sometimes have to use welding gloves to put the warm kiln on a cart, take it outside, load it in the car, and wrap it in a wool blanket.“I have traveled out of state with my SC-2 repeatedly. Fired it over and over again in class, burned up all manner of skewers, toothpicks, cork clay and more. The kiln can take it! While I'm sure the kiln wou...
AMXmachinery
PARTE: 12055 – ESCOPLO OSCILANTE - 5 CABEZALES POR LADO - BACCI MX
PARTE: 12055 – ESCOPLO OSCILANTE - 5 CABEZALES POR LADO - BACCI MXUSADA – EN BUENAS CONDICIONES5 CABEZALES POR LADO2 MESAS GEMELAS1988460V, 3 FASES
AMXmachinery
PERSIANERA PARA HACER SHUTTERS
PARTE: 2LO-CM-200LG - PERSIANERA PARA HACER SHUTTERSFeatures:- A faster round louver groove mortise machine provides variable oscillating speed.- Distance between the slot is controlled by the template.- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.- Automatic pneumatic hold down clamps- Fully automatic mortise produce cycles.- Pneumatic pistons for drilling depth speed control, enable for best results.- Depth of mortising ...