ID: 2076
Open
PARTE: AMX-10159 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 15-3/4” - MOTOR 3/4 HP
AMXmachinery
Description
PARTE: AMX-10159 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 15-3/4” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES
MOTOR 3/4 HP, 220/440V, 3 FASES, 1750 RPM, SIEMMENS
DIAMETRO INTERNO: 15-3/4”
DIAMETRO EXTERNO: 18”
MEDIDAS TOTALES: 25” LARGO X 13” ANCHO X 18” ALTO
TODOS LOS 4 BALEROS NUEVOS
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTON
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS NUEVOSMedidas totales: 25” ancho x 17”
fondo x 20” altoEntrada redonda: 7”Salida redonda: 5”
Motor: 3 HP, 230/460V, Amp 8.2/4.1,
RPM 3490, Marca Dayton Video: https://vimeo.com/870516485
AMXmachinery
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONESManufactured
in 1999•
Combination sanding head with 5 ½”contact
drum and 3 ½” platen• 20 HP
TEFC Dual Voltage Motor, 460Volt, 3
Phase, 28 Amps• Start,
Stop and E-Stop buttons withmagnetic
starter and locking disconnect• Motor
brake Via E-Stop• 1 HP
feed motor• 37” x
75” Sanding belts• Manual
variable feed speed, 15 – 60 fpm• Manual
thickness adjustment with re...
AMXmachinery
LIJADORA DE BASTONES - 2 LIJAS
PARTE: 2SW-FS-80B2 - LIJADORA DE BASTONES
- 2 LIJAS
NUEVA CON GARANTIASpecificationsSanding
Belt Drive Motor: 5HPDust
Sution Motor: 1/2HPSanding
Belt Size: 5" X 73”Applicable
Rod Diameter: Ø5-Ø80mmFeed
Speed (Variable): 1-20m/mmSanding
Belt Linear Speed: 1080m/mmNet
Weight: 450kgsGross
Weight: 530kgsMachine
Dimensions (L*W*H): 1050*850*1300mmPacking
Dimensions (L*W*H): 1120*920*1520mm
Design
and specifications are subject to change wi...
AMXmachinery
2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”
PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”Nueva con garantíaFeaturesStandard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞Wall thickness: 0.04〞-0.19〞Hydraulic power drive, PLC ControlBending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.Easy to operate, reasonable in composition, and l...