Identificador: 629
Abierta
Descripción
PARTE: 1PW-4500 - PLANTA DE LUZ 4,500 WATTS
| MODELO | PW-4500 |
| FASES | MONOFASICA |
| ARRANQUE | MANUAL |
| CAPACIDAD MAXIMA | 4500 WATTS |
| CAPACIDAD NORMAL | 3600 WATTS |
| VOLTAJE | 120 VOLTS |
| AMPERAJE | 20 AMP |
| MOTOR | 7 HP/3600 RPM |
| NIVEL DE RUIDO | 60 DB @ 7 MTS |
| TANQUE | 15 LTS |
| FUNCIONAMIENTO AL 50% DE CARGA | 13 HRS |
| PESO | 48 KGS |
CONTIENE KIT DE ARRASTRE
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – CAPACIDAD 28”
PARTE: 2AA-8-MARK-II - SIERRA CINTA
– CAPACIDAD 28” – AMADA
NUEVA CON GARANTIA
SPECIFICATIONS
& FEATURES
Rectangular
Capacity Standard
Capacity M6 High
Column Capacity (Optional)
Blade
at 90° 18” x
22” (457 mm x 560 mm) 18” x
28” (457 mm x 711 mm)
Blade
at 45° ...
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
CORE BUILDER
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...