Identificador: 93
Abierta
Descripción
PARTE: 2EV-0110 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110
Maximum Post Forming Length : 12’
Overhead Radiant Heater and Deflectors
Push Button Pneumatic Controls
Steel frame with adjustable leveling feet.
35" working height. Dimensions 175” long, 26” wide, 60” high
Adjustable Leaf Spacing Between ½” and 1 ½”
Electrical: 240 V, 1 PH, 60 Hz
Air Requirement: 100 PSI
Crated weight 1500 LBS. Shipping dimensions 182” long X 30” wide X 64” high
Options:
¼” cove rod system (required for doing a coved back splash) add $3,600
180 degree forming leaf
Additional 90 degree leaf
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
SIERRA VERTICAL - 74" ALTO X 120" LARGO
PARTE: 2SS-H6 – SIERRA VERTICAL – MOTOR 3 ¼ - CAP. 74” ALTO X 120” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 74"CORTE HORIZONTAL: 120" SIN LIMITEESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 120"DATOS DE ENVIOPESO: 359 LBSDIMENSIONES: 120 X 11 X 95 PULGADAS
AMXmachinery
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
Usado - Muy Buenas Condiciones
Modelo: NFP-S1000
Tested and works
as it should.
Does not include
the catch / waste bags
Total filtration
area 360 ft2
See attached PDF
for all specs
Year 2018
230/460V 3PH
AMXmachinery
PARTE: 12426 – ESPIGADORA DOBLE DE CADENA - CELACHI - DOUBLE END TENONER
PARTE: 12426 – ESPIGADORA DOBLE DE CADENA - CELACHI -
DOUBLE END TENONER
USADA - BUENAS CONDICIONES
Marca: Celachi
Útil para la fabricación de pisos de madera puertas de
gabinetes, etc.
Para moldurado longitudinal Cabinas con 4 motores cada
una.
Velocidad variable de alimentación mediante inversor de frecuencia.
Volts 380 50Hz.
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE # 2TA-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate ...