Identificador: 94
Abierta
Descripción
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138
All Form 8' capacity
- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz
- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)
- Standard Features:
- Overhead clamp and vacuum system
- Forming length capacity 100"
- 1 ½” maximum forming radius. (3” thick material)
- Foot print 4' wide X 11' long
- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit
- Integrated timer. Individual control on all air components.
- Working height 36"
- Crated weight 1855 LBS.
- Shipping dimensions 143” long X 46” wide X 57” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15USADO - MUY BUENAS CONDICIONESSpecifications:Working field for boring & routing: "X" Axis 86.5" (2,200 mm), "Y" axis 35.3" (898 mm) for boring & 37.4" (950 mm) for routing, max. panel thickness 2.5" (65 mm). Positioning speed:"X" axis at 246 FPM (75 MPM), "Y" axis 147 FPM (45 MPM), "Z" axis 49 FPM (15 MPM); "X" axis moves on high precision prismatic guides and ground helical rack; "Y" & "Z" axis via hardened ground ball screw. Work Table:...
AMXmachinery
TRISCADORA 10-60 MM AUTOMATICA
PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]: 0,5 – 1,2 mmBandsaw Width [min-max]: 10 – 60 mmSetting Pitch [min-max]: 5 – 35 mmSetting Speed [d...
AMXmachinery
REASERRADORA 4 SIERRAS BAKER
PARTE # 11815 - REASERRADORA - 4 SIERRAS - BAKEREN MUY BUENAS CONDICIONESBaker 4-HeadRebuild includes New: Belts, Bearings, Sprockets where neededRecrowned Band WheelsReturn Conveyor
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO