Identificador: 1614
Abierta
Descripción
PARTE: 2TY-80-2407 - PRENSA PARA PANELES CURVOS
NUEVA CON GARANTIA
EJEMPLO ATAUDES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
DEBARKER NICHOLSON 27"
PARTE # 11604 – DEBARKER - NICHOLSON 27" A5A RINGEN BUENAS CONDICIONES DE OPERACIONLEFT HANDAIR SEAL
AMXmachinery
CEPILLO 12.5" PORTATIL
PARTE # SIL-DC-CM12.5-B - CEPILLO 12.5" PORTATILMOTOR: 2 HP, 110V, 60 Hz, 1 FASECAPACIDAD DE CORTE: 12.5" X 6"MAX. PROFUNDIDAD DE CORTE: 12.5" X 1.2MM, 3.2 MM X 5"VELOCIDAD DE CABEZAL: 6500 RPMCORTES POR MINUTO: 13,000CANTIDAD DE CUCHILLAS: 2 PIEZAS (DOBLE FILO)PESO: 34 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...