Identificador: 1943
Abierta
Descripción
PARTE: 12385 - SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
USADA - BUENAS CONDICIONES
54" Dia. Wheels with 6-1/2" Face
7" x 29'0" blade Size
Air Tensioning with Dial Adj. for Top Wheel
Self Centering Feed Works that can also be preset to a size
six 7" Dia. x 12" High Smooth Feed Rolls (Three Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw Blade
21" Max. Feed Roll Opening( 12" Outside Sawline, 9" Inside Sawline
Steel Weldment Roll Cradle with Chrome Plated Ways
Steel Weldment Feed Roll Brackets
45 Degree Tilt with In/Out Adj.
Electric Foot Switch for Opening Feed Rolls
7.5 HP Hyd. Power System with Air to Oil Cooler for Reversible Inf. Variable Feed Speeds from 50 to 300 FPM
2 Fluid Motors in Series (One for Each Set of Feed Rolls)
Operator Control Station with Feed Speed Control Dial and Forward, Stop, and Jog Reverse Pushbuttons
Band Saw Clean and Lube
Sawdust Pan Kit
Ambitec Short Stop Model Electric Brake
100HP Toshiba (440/3/60) Motor
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PRENSA CALIENTE DE VAPOR CON 9 PLATOS
PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS
1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8
ABERTURAS MARCA IND. G.H. CON DIMENSIONES DE 60” POR 108” ACCIONADA POR UNIDAD
HIDRAULICA, EQUIPADA CON MESA DE ALIMENTACION, MOTORES DE 2 A 7.5 HP ASI COMO
15, 30 Y 40 HP CON RELOJ DIGITAL PARA EL TIEMPO DE PRENSADO CON UN RANGO DE 1 A
30 MINUTOS, CON BOMBAS HIDRAULICAS EN EL INTERIOR DE DIFERENTES CAPACIDADES DE
5 A 20 HP.PLATES: 56" X 108"PRESSURE WHEN IN USE: 2300-2500 LBSTEMPERATUR...
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
PARTE: 12582 – CHAFLANADORA -UNKNOWN
PARTE: 12582 – CHAFLANADORA -UNKNOWNUSADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
PARTE: 12306 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant t...