Identificador: 2026
Abierta
Descripción
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha 1-13/16 - si quita el buje 2-1/8"
Diámetro exterior: 6” (150 mm)
Largos:Largo 2-1/4” (57 mm) – existencia – 11 piezas Largo 3” (75 mm) – existencia – 4 piezasLargo 4” (102 mm) – existencia – 4 piezasLargo...
AMXmachinery
ADAPTADOR RAPIDO CAMBIO BROCA - MAGGI
PARTE: 2MG-36000061 - ADAPTADOR RAPIDO CAMBIO BROCA - MAGGINUEVO CON GARANTIA
AMXmachinery
REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
PARTE: 3SW-
HBR-300 - REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
NUEVA CON GARANTIASpecificationsMaximum Material Size (W X H): 12"x 12
"(300x300 mm)Distance From Blade To Conveyor: 5/64"~10-5/8"(2~270mm)Minimum Cut Piece: 2mmSaw Wheel Diameter: 28" x2(700mm x2)Sawblade Length: 196"(4980~4990mm)Sawblade Width: 2" OPTION 3"(50mm
OPTION 75mm)Conveyor Belt Sizes(Wxl): 270 x 4200mmSawblade Speed: 25.4m/sFeed Motor: 1HP WITH INVERTERFeed Conveyor Tilt: 0~30 DEGREEFeed Speed (Variable): 0~1...