Identificador: 885
Abierta
Descripción
PARTE # 10206 - SIERRA MULTIPLE SCM, MODELO M3
MOTOR PRICIPAL 25 HP, 220V, 3 FASES
MOTOR AVANCE 2 HP, 220V, 3 FASES
PARA SIERRAS DE 300 MM DIAMETRO
VELOCIDAD DE AVANCE 64 PIES/MIN
EN BUENAS CONDICIONES DE OPERACION
ACEPTA MADERA HASTA DE 3-1/2" DE ESPESOR
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACT - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
NUEVA CON GARANTIA• 5’5” x 10’2” cut capacity; 2-3/8” (60mm) cut depth• 5-1/4hp, 3-ph high-efficiency motor w/ electro-mechanical brake• One-piece full-length centershelf with moveable aluminum fingers• Integral full-length wood support area for small part support• Specially designed measuring stop for use w small partsFlexible and EconomicalThe STRIEBIG COMPACT is the entry leve...
AMXmachinery
PARTE: 12269 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12269 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE PARA TERRACERIA
MOVIMIENTO LATERAL DE CARGA
TORRE LEVANTE 3 SECCIONES
GAS LP
AMXmachinery
GRABADORA DE MOLDURAS - MAKOR
PARTE: 12419 - PRENSA - GRABADORA DE MOLDURAS
- MAKOR
USADA – MUY BUENAS CONDICIONES
This
machine has been designed to hot-press directly on wood or using wood paste.
It
is particularly suitable for coffins and funeral fittings, furniture and
accessories, picture frames, pelmets, etc.
Press
length 17.71" to R/L
Material
max width; 7.68")
Engraving
depth 3mm
Dual
propane torch heaters
Includes:
Large inventory of wheels as shown
230 Voltage 60 Cycle 3 Phase
...
AMXmachinery
ALIMENTADOR PARA SIERRA CINTA - 1/8 HP 220V, 1 FASE
PARTE: 2SG-AF06 - ALIMENTADOR PARA
SIERRA CINTA - 1/8 HP 220V, 1 FASE
Nuevo con garantía
Para sierras cintas hasta de 24”Ideal
for light to medium duty use on a bandsaw and is spring-loaded, ensuring smooth
and accurate cuts. A
much better alternative to using standard 3 and 4 wheel machines.Equipped
with two 8 x 1" Polyurethane Rollers and can be adjusted in and out
depending on the size of your bandsaw table. FeaturesVariable
Speed - 0-40Ft/min1/8
HP Motor 220V, 1 faseMax
...