Identificador: 2946
Abierta
Descripción
PARTE: SIERRA PENDULO
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA
PARTE: 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1 strip)min. 75 mm (85 mm for 1 strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimensions ...
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...
AMXmachinery
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA