Identificador: 1167
Abierta
Descripción
PARTE: 2FA-DET20 – SIERRA TRIMMER – 74" LARGO
NUEVA CON GARANTIA
Adjustable
head system that can process up to 4-1 /2" tall material.
This machine's sturdy construction, quick cycle time, and simplicity will add to any operation.
Standard Features
20" Carbide Blades
Adjustable Blade Position
Up to 4-1/2" Tall Capacity
Machine Specs
Dimensions
Length: 8′
Width: 8′
Height: 4′
Infeed Height: 3′ 4"
Power
Arbor Motors: 5 HP 208/230/480/3/60 TEFC
lnfeed Motor: 1 HP 208/230/480/3/60 TEFC
Completely pre-wired motor starter with start/stop buttons and circuit overload protection
Specifications
20" Carbide Blades
Adjustable Blade Position: Adjust Length of Cut with the Turn of a Handle
1-1/2" Arbors and Bearings
60P Chain
Capacities
Material Length: 18" to 74"
Material Width: 8"
Material Thickness: 4"
Cuts Per Minute: 0-60 Boards
Options
Machine Options
Waste Conveyor: Inclined or Flat
Precision Laser Guides: Laser Indicators
Longer Length Capacity
4" Dust Ports
Custom Hold Downs
Custom Blades for Other Material
System Options
Infeed Chain Conveyor
Outfeed Belt or Chain Conveyor
Take-Away Rollcase
Sorting Table
Power Options
5 HP Motor: 220V or 230V
10 HP Motors: 220V, 230V, or 480V
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-SB10G - SAND BLASTER - TANQUE 10 GALONES
PARTE: 1SL-DC-SB10G - SAND BLASTER - TANQUE 10 GALONESPresión requerida 60-125 psi, volumen 6 a 25 CFM dependiendo de la medida de la boquillaIncluye: Pistola, ajuste de presión, 4 boquillas de cerámica .10”, .125”, .150”, .175”, manguera de 9 pies (2.7 metros)Dimensiones totales: 33-1/2” x 18-3/4” x 13”
AMXmachinery
ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
PARTE: 12128
- ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY
BUENAS CONDICIONES - REACONDICIONADA
Width
Capacity: 68"
Grooved,
Rubber-Covered Applicator Rolls
Applicator
Roll Diameters: 7.75"
Main Motor:
1.5 HP, 208-230/460v, 3ph
Hard
Rubber-Covered Doctor Rolls
Top-Elevator
Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical
Digital Readout for Thickness
Currently
460v, 3ph (Ask about Voltage Change)
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
CARDADORA DE CEPILLOS METALICOS
PARTE: 12196 - CARDADORA DE
CEPILLOS METALICOS
USADA – BUENAS CONDICIONES600mm working wide2 metal
rollers to bush lumber or metal
Manufacture
year 2015220 VoltsBrand: Houfek
Model: Twingo 600 BBInfeed speed can adjust from 0 to 15 m/min. Max working height 200 mm