Identificador: 1804
Abierta
Descripción
PARTE: 2CK-PCS24
Is the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful 15HP motor and adjustable cutting stroke ensure it can effortlessly cut though a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, and a security bolt on the saw access door. Available in either left-hand or right-hand operation depending on your ideal production flow.
- Large cutting capacity from 2”x21” up to 8”x 8”
- Adjustable cutting stroke to ensure optimum cutting speed and cut quality
- Reliable performance day in and day out
- Added safety features
KEY ADVANTAGES
- Available in Right Hand & Left Hand configuration
- Cut off capacity (thickness x width): 2″ x 21″, 4″ x 19″, 6″ x 15″, 8″ x 8″
- Powerful 15HP main motor
- Pneumatic foot pedal operation with adjustable cutting speed from the front of the machine (Optional dual push button control)
- Fast cutting cycle with up to 40 strokes per minute
- Cast iron table surface is precision ground assuring high cutting accuracy.
- Material clamp is easily adjusted for workpiece thickness variation.
- CSA/UL magnetic switch
|
Cutting capacity (thickness x width) |
2″x21″, 4″x19″, 6″x15″, 8″x8″ |
|
Cycle speed |
40 strokes/min |
|
Cycle operation |
Air / mechanical |
|
Saw blade size |
24″ max. (20″ min.) |
|
Saw arbor diameter |
1″ |
|
Saw blade speed |
2400 RPM |
|
Dust exhaust diameter |
Ø4″ x 2 |
|
Air consumption |
27.5 CFM |
|
Motor |
15 HP |
|
Table size |
45.3″ x 26″ |
|
Net weight |
1058 lbs |
|
Gross weight |
1433 lbs |
|
Machine dimensions (LxWxH) |
40.2″ x 45″ x 55″ |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARES
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARESNuevos con garantía 5 HP - BEL50XL - 230/460V7.5 HP - BEL75XL - 230/460V10 HP - BEL100XL - 230/460V15 HP - BEL150XL - 230/460V20 HP - BEL200XL - 230V - 460V PODEROSAS, BAJO EN RUIDO, SISTEMAS PARA INTERIORES DE COLECCION DE ASERRIN
Ranging
from 5 HP to 20 HP, it offers high efficiency and a full range of features. Designed in compliance with NFPA.
Optimized for maxim...
AMXmachinery1
SIERRA MULTIPLE - 16 PULGADAS
PARTE: 2CK-MRS350FEATURESThe Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with Heavy Guided Chain. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel 55mm dia. Saw Arbor with 70 mm OD with dble. keyed Quick Removal SleevePowered Rise & Fall to the Pressure RollersNew style round Fence Bar support with Quick-Shift Long FenceLong Infeed Fence with Heavy Round Bar for moun...
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R375V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the mid-size version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square asse...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...