Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PARTE: 2TA-SFJ-4-141-AUTO - SISTEMA FINGER JOINT - AUTOMATICO - CAP 4” X 141”
Nueva con garantía
Incluye: Mesa Entrada Motorizada, Trompo Derecho, Trompo Izquierdo y Prensa
Features:
- The fully automatic production line complete with the right hand shaper, left hand shaper, and assembler to produce the mass finger joint stocks.
- The right hand shaper performs end trimming and shaping functions on right end of sticks.
- The left hand shaper performs end trimming, shaping & gluing functions on left end of sticks.
- The two trim saws are fitted with one saw blade for cutting even end of stick, and one blade for tip break ensuring a great jointing result.
- Air-operated clamp comes down to hold sticks firmly in place. After workpiece is clamped, table starts to feed, performs trimming and shaping operations.
- The shaper spindle is precision-constructed for cutting finger shapes accurately and accommodates a maximum cutter diameter up to 6".
- The spindle height adjustment is displayed on a dial readout gauge for easy adjustment.
- The table travels on a precision linear motion guide.
- The table traverse is driven by hydraulic power system, ensuring very stable, smooth workpiece feeding. Thus, an accurate, fine cutting result is guaranteed.
- Once the right hand shaper finishes the cutting, then the conveyor table automatically transfers the sticks to the left hand shaper and comes back to the start position for acceptance of the new sticks for work right away.
- In the meantime, when the left hand shaper finishes, the sticks will auto transfer for inspection, then be sent to assembler for assembly press to finish the cycle.
- The assembler is a very efficient automatic machine that performs three functions, jointing of sectional sticks which have been glued, cutting the jointed sticks to desired length, final assembly is securely pressed by powerful hydraulic system, then the jointed sticks are fed out regularly.
- Auto power feeder for fast feeding and auto stops at the length to be cut.
- Furnished with cutting off saw as standard equipment for cutting workpieces to the length desired.
- The maximum length of jointed stick is 16'. Other sizes are available upon request.
- The machine employs an advanced programmable logic controller for easy operation and maintenance.
- The machine's motion sequences are displayed by the signal lamps for easy checking in the event of a malfunction.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit
Publicar mensaje
PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION USADO - BUENAS CONDICIONESPrecision 58" Chipper - Model 58-60-166 Knife 150 HP Motor
AMXmachinery
ARMADORA MARCOS U-500
PARTE # 2NE-U-500 - ARMADORA DE MARCOS PROGRAMABLE/1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-...
AMXmachinery
LIJADORA 42"
PARTE # 2TA-WS- A4375 - LIJADORA - CALIBRADORA - 43" ANCHOCabezales: 1 cabezasCapacidad: 43" ancho x 75" largoRugged heavy-duty sheet metal construction de...
AMXmachinery
DESCORTEZADORA 27"
PARTE # 11909 – DESCORTEZADORA NICHOLSON 27” A5AFabricación: 1996Tandem Ring w/Slitter Arm Barker240 FPMAir Seal Beater Ring440V 3PhaseSerial#6705Tandem RH 10 Roll.
AMXmachinery