Identificador: 34
Abierta
Descripción
PARTE: 2RT-R200T - TALADRO BASTIDORES - 1 BROCA
1.5 HP Spindle Drive Motor, TEFC
Manual Controls, 1-Phase, 110 V, 60 Hz
Foot Actuated Boring Cycle
14 Degree Single Spindle
6,100 RPM Spindle Speed
Ball Bearing Collet Guide Bushing Block
24” x 30” Table Area
Adjustable Fence with (2) Stops
Tooling Included
Designed and Manufactured in the USA
Additional options for this machine include:
R200T3 – 1.5 HP 3-Phase 230/460 Volt
His machine is part of the R200 assembly system that includes the R200E/A and is sold separately.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachinery
ARMADORA DE MARCOS - ALFA MACCHINE - MITRE-MITE VN4 + MP
PARTE: AMX-10173 - ARMADORA DE MARCOS - ALFA MACCHINE -
MITRE-MITE VN4 + MP
MEMORIA PROGRAMABLE
USADA - FUNCIONANDO
HECHA EN ITALIA
TAMANO DE MESA: 11.75” ANCHO X 22” ALTO
ALTURA DE LA MESA PARA TRABAJAR: 37”
PARA MARCOS DE ESPESOR: 0.197" MINIMO A 3.15" MAXIMO
PARA MARCOS DE ANCHO: 0.39" MINIMO A 3.94" MAXIMO
NECESITA AIRE COMPRIMIDO
ENERGIA: 110V, 1 FASE, 60 HZ
TABLERO: ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE
MEDIDAS MAQUINA: 31” A...
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...