Identificador: 582
Abierta
Descripción
TANQUES DE ALMACENAMIENTO DE AIRE
MODELO Y PRESION (BARS) | CAPACIDAD |
32IG-600-1 0.6/8 |
600 L |
32IG-600-2 0.6/10 | |
32IG-600-3 0.6/13 | |
32IG-1000-1 1.0/8 |
1000 L |
32IG-1000-2 1.0/10 | |
32IG-1000-3 1.0/13 | |
32IG-1500-1 1.5/8 |
1500 L |
32IG-1500-2 1.5/10 | |
32IG-1500-3 1.5/13 | |
32IG-2000-1 2.0/8 |
2000 L |
32IG-2000-2 2.0/10 | |
32IG-2000-3 2.0/13 |
- Nuevo con garantía de 12 meses en partes mecánicas
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachinery
LIJA BANDA - LIJADORA BASTONES
LIJA BANDA PARA LIJADORA BASTONESGRANO 80, 100 Y 120SIL-R-FUS220-80 - BANDA X 86-080 127 MM X 1.86 MTSSIL-R-FUS220-100 - BANDA X 86-100 127 MM X 1.86 MTSSIL-R-FUS220-120 - BANDA X 86-120 127 MM X 1.86 MTS
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
INDEX TABLE
PARTE # 11903 – INDEX TABLE – EVANS MACHINERY 4253Very good condition5' x 12' capacityIncluding roller section between panel support railsRails equipped with beveled rollers to transport panel to end stopEnd stop with bump switch to activate panel dropPanel is driven to end stop with powered drive rollerElectric 230 volt, cycle, 3 phase