Identificador: 399
Abierta
.png)
Descripción
PARTE # 2EX-ET-150 - TROMPO - MOTOR 7.5 HP - CON FLECHA DE 1-1/4"
PARTE # 2EX-ET-160 - TROMPO - MOTOR 10 HP - CON FLECHA DE 1-1/4”
Nuevo con garantia
Engineered for continuous industrial use, shapers are great machines for demanding applications. The large work area, reversable spindle, optional digital readout, and powerful motors ensure clean, safe and efficient production.
3 spindle speeds: 5.5, 7.5 and 10K RPM
Reversable
Magnetic starter
Precision fence assembly
Table inserts
Front access panel
Spindle lock
Micro adjust left and right positioning
Spindle brake
Emergency stop
Optional digital readout
SPECIFICATIONS
Horsepower: 7.5HP
Voltage: 230V or 460V
Phase(s): 3PH
Main Motor: 7.5 HP
Spindle RPMs: 5.5 / 7.5 / 10K
CFM Requirements: 750
Table Size: 46" x 34"
Max Diameter: 12-3/8"
Spindle Travel: 6-1/2"
Included Spindles: 1-1/4 Fixed
1-1/4" Spindle: 5-13/16"
Interchangeable Spindles: No
Amps: 18
Weight: 1250 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...
AMXmachinery
PARTE: 1AM-2016 - SIERRA PENDULO – MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"
PARTE: 1AM-2016 - SIERRA PENDULO –
MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"NUEVA CON GARANTIADISCO 16" DIAMETROMOTOR 5 HP, 220V, 3 FASES, 1,750 RPM2 MESAS DE TRABAJO LATERALES CON RODILLOS DE 120 CM LARGO C/U1 TOPE AJUSTABLE PARA PONER MEDIDA DE CORTE A LARGO EN CUALQUIERA DE LAS 2 MESAS LATERALESGABINETE PARA HERRAMIENTA ABAJO DE LA MESA DE 20” ANCHO X 40" FONDO X 19" ALTOCAPACIDAD DE CORTE:MAXIMO LARGO: 12”MAXIMO ALTO: 5”DANDOLE LA VUELTA AL TABLON CABE HASTA 6-1/2” DE ALTO CO...
AMXmachinery
BRIQUETEADORA PARA MADERA - 7.5, 10 HP
PARTE:
4GR-G2-50 - BRIQUETEADORA PARA MADERA - 7.5, 10 HP
NUEVA CON
GARANTIAVolume reduction and production of heating material Developed for chips and dusts especially. These
high-performance, robust and high-quality machines compress homogenous material
to form com-pact briquettes. Due to its highly effective hydraulic system,
their wattage is extremely low considering their briquetting output.The machine is extremely silent, requires only little room
and can be set up almost anywher...
AMXmachinery
GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSI
PARTE: 12157 - GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSIUSADA – MUY BUENAS CONDICIONESCombined length- and crosscut veneer guillotineYear of manufacture 1980Cutting length mm 4.200Length of cross-cut mm 600Strip width max mm 700Cutting height mm 60Strip width min mm 25Digital readout YesSafety device YesCross cutting device YesCross-cut guillotine YesPressure beam hydraulicBlade drive hydraulicAvailability short-term, ex location customer!Operating status dismantled/ stored