Identificador: 2543
Abierta
.PNG)
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03
Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line is carefully designed and built for maximum dependability year after year, making it a continuous game-changer in the wood industry.
- Excellent performance-to-cost ratio
- Only two operators required for maximum production
- Injection type gluing system
- Standard: PVAc glue – Tooling for PU, MUF, EPI, etc. glues available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Servo motor capable of provides a production rate of up to 5~6 cycles/min
- Three initial infeed tables lead to a fully automatic operation from feed to pre-press assembly stand
- F-C05 and F-C06 finger shapers perform automatic scoring, trimming, shaping, and gluing
- F-D01 enables automated workpiece feeding, aided by a steel brush roller that gently flips materials one by one into the pre-press assembly stand
- With the choice of 10 feet or 20 feet in length the F-T03/F-T05 chain type pre-press ensures accurate vertical and horizontal alignment before workpiece is cut to length
- Synchronized jointing and cutting is performed in a 2-step process within the F-A03 assembly press by employing two hydraulic cylinders at the front and rear to provide an extremely consistent joint
Includes the following:
F-I01 Multi-Stage (Three) Initial Conveyor Tables
Auto Feeding Table | 650 mm (25.6“) |
Brush Wheel Drive Motor | 1 HP x3 |
Machine Dimension (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39”) |
Packing Dimension (L x W x H) | 3300 x 970 x 1070 mm (130 x 35 x 43”) |
F-C05 Automatic Finger Shaper – Right End
Max. available width working table | 650 mm (25.6”) |
Range of workpiece length | 150~1000 mm (5.9~39.4”) |
Range of workpiece height | 30~160 mm (1.2~6.3”) |
Table moving speed | 66 FPM |
Trimming saw speed | 2800 RPM, 3400 RPM |
Finger cutter speed | 5000 RPM |
Scoring saw speed | 2800 RPM, 3400 RPM |
POWER REQUIRED | |
Table-drive motor | 1/2 HP |
For conveyor motor | 1/2 HP |
Scoring saw motor | 1 HP |
Trim saw motor | 10 HP |
Shaper cutter motor | 20 HP |
Dia of Cutter (in/out) | ø70 / ø160 mm (ø2.8 / ø6.3) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2CK-ECT SERIES - DOUBLE END TENONER - 8 CABEZAS - 141” ANCHO
PARTE: 2CK-ECT SERIES - DOUBLE
END TENONER - 8 CABEZAS - 141” ANCHOThey are available with up to (8) spindles (4-per side) and come in widths from 51” to 141”. These double end tenoners are ideal for door, furniture, & window production and more. The ECT series can be customized for your specific needs with a wide range of processing units and features. The ECT are available as a stand-alone solution or can be purchased in a line for processing all four sides of a workpiece auto...
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
ASTILLADORA - 15 PULGADAS
PARTE: 2TA-WG-1510 - ASTILLADORA - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
SIERRA MULTIPLE - 2 SIERRAS MOVIBLES
PARTE: 2CK-MRS340MThe motorized moving blade system is designed to provide you with maximum flexibility in your ripping operations to achieve the maximum yield from your material. The touch screen control allows the operator to pre-set the blades position(s) or jog the blades to achieve the desired ripping result. Each moving blade is controlled by a servo motor and is adjusted using a ball screw and linear guideway for the highest accuracy. The blade position is indicated with a laser...