Identificador: 2567
Abierta
ID de articulo : # 2567 se ha agregado a su lista de deseos.
.PNG)
Descripción
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga PARTE: 2GM-HS-0808M
- ISO 9001 certified
- Taiwan machines
- HS-0808M with 24” manual back gauge
- Quick Change Blade Gap Adjustment (BGA), with gap dial
- CE standard “OMERO” electric control system
- Meet OSHA safety standard code
- Shadow line for accurate straight cutting
- Adjustable cutting length and stroke
- Ball transfer plates on worktable for easy loading workpiece
- Well balanced and sturdy all steel machine frame
- German made Hydraulic logic system centrally located and quiet
- Hydraulic hold-downs with anti-mar neoprene
- Shear blades are high grade carbon/chrome alloy steel and hardened to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length viewable safety finger guard to protect operator from cutting hazard
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
- Hydraulic, electrical overload protection
- Compact operator control panel
- All motors are overload protected & low voltage control system
- Jog or continuous auto cycle cutting operation modes
- HS-0808M comes with 24” manual back gauge
- 1 each 60” squaring arm with inlaid inch/metric dual scale
- Quick change blade gap adjustment (BGA) with gap dial
- Shadow line for accurate straight cutting
- Material support and drop back chuter
- Upper and bottom blade set with 2-edge on bottom & 2-edge on upper
- 2 each 24” front support arms
- Hydraulic hold-downs with anti-mar neoprene
- Full length viewable finger guard
- Removable safety foot pedal
- Tool box
Cutting capacity: Mild steel Stainless steel |
8'x 8 Ga. 8' x 11 Ga. |
| Blade length | 8'2" |
| Strokes per minute | 10-15 |
| Worktable height | 34 1/2" |
| Front support arm | 24" |
Back gauge | 24" Manual Back Gauge |
| Blade rake angle | 2 degree |
| Oil tank cap. | 22 Gal |
Main Motor
Powered B.G. Motor | 10 HP, 220V/35A - 440V/18A, 3 PH,
1 HP, 220v/440v, 3 PH |
| Machine weight | 11,350 LBS |
| Machine dimensions | 157" x 76" x 65" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
PARTE: 2MK-CY/3.C - COLECTOR DE POLVOS - 3HPThe Dust Collector was developed for cabinet shops with high production. Collects dust of up to 3 machines simultaneously. A light weight and easily transportable machine.Technical InformationMotor Spec1 Phase 220V 3HP 15AAirflow Capacity1941 CFMSound Rating80dbFan Diameter14' / 356 mmNumber Inlet3"Inlet Size4"Filtration1- micronCartridge Filtration size13" x 31"Cartridge Bag Size14.5" x 29.5"Drum Size31 GalDrum Bag Size20" x 43"Machine Dimensions45" x...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 1 HUSILLO
PARTE: 2RI-R130 - BARRENADORA HORIZONTAL - 1 HUSILLODescription:Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:Single spindle head7/16-14 Female Thr...
-500x500.png)
AMXmachinery1
MESA DE MONTAJE - MARCO FRONTAL ABIERTO
PARTE: 2RI-R210E/A - MESA DE MONTAJE - MARCO FRONTAL ABIERTOScrewed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No...